Shop All

Introducing the 25 Pack Classroom Set of the FRC Robot Basics Guidebook The FRC Robot Basics Guidebook is your go-to resource for understanding the fundamental components and techniques used in the FIRST Robotics Competition. Whether you’re a...

The NEO Vortex is a high-power, high-performance, and high-resolution sensored brushless motor that is compatible with the REV ION System. It features a dockable controller interface that can be mounted directly to the SPARK Flex Motor Controller or our...

The SPARK Flex is a new smart motor controller that is compatible with the REV ION System. Its dockable form factor allows for the direct mounting onto a NEO Vortex, simplifying wiring while maintaining flexibility. Improving upon the...

The Vortex Shaft - MAXSwerve Integrated Key is compatible with the REV ION System and gives users the ability to drive a MAXSwerve Module without the need for the MAXSwerve Key. This eliminates a potential point of failure in the MAXSwerve since the key...

The Vortex Shaft - 20DP Gear - 7T is compatible with the REV ION System and offers users the unique ability to achieve substantial gear reductions directly from the motor. This gear features a 7T 20DP design that is typically too small for an 8mm keyed...

The Vortex Shaft - Falcon Compatible Spline is compatible with the REV ION System and gives users the ability to drive components that have a falcon spline bore. *Falcon is not a REV trademark. Featuring a 1/2in hex section that drives the shaft and a...

The 8mm Vortex Shaft, compatible with the REV ION System, empowers you to utilize the NEO Vortex Brushless Motor with any 8mm keyed shaft component. This interchangeability also means that the NEO Vortex matches the output of a NEO Brushless Motor V1.1,...

The Vortex MAXPlanetary Input Kit is compatible with the REV ION System and gives users the ability to mount a MAXPlanetary Gearbox directly to your NEO Vortex Brushless Motor and SPARK Flex Motor Controller. Working seamlessly with the MAXPlanetary...

The Flex Dock transforms the SPARK Flex (REV-11-2159) into a standalone motor controller, supporting REV brushless motors and virtually any 12V brushed DC motor by providing standard phase wire outputs. The 6-pin JST PH encoder port is compatible with...

The NEO Vortex Solo Adapter, allows teams to seamlessly integrate the NEO Vortex Brushless Motor with a SPARK MAX Motor Controller. This adapter breaks out the motor sensor connector and phase wire connections. While the NEO Vortex Solo Adapter allows...

Building on the robust foundation of the original SPARK, the SPARK MAX Motor Controller incorporates advanced brushed and brushless DC motor control in a small and easy-to-use package with PWM, CAN, and USB connectivity. Never before has an FRC...

The 3in MAXSwerve Module is the smallest and lightest swerve module designed for FRC Teams. Leveraging many parts of the REV ION System, MAXSwerve aims to reduce the complexity traditionally associated with swerve drivetrains. The module features a 3in...

The Gear Ratio Upgrade Kit is compatible with the REV ION System and works with the 3in MAXSwerve Module and comes with two additional motor pinions and four additional spur gears that create five new extra high speed ratios to make your drive faster and...

The MAX 180 Degree Gearbox is compatible with the REV ION System and is designed to give you extra flexibility in your robot construction. Engineered to let you flip your motor 180 degrees to the output, optimizing space for tighter packaging. This...

The Linear Actuator - 12in Stroke is compatible with the REV ION System. This electric linear actuator aligns seamlessly with FRC-legal motors and gearboxes while adhering to FRC hardware and mounting standards. Designed for adaptability, this...

Kick off your student's journey into robotics education with our all-new curriculum: Intro to Robotics I. Complete our Curriculum Response Form and get a complimentary coupon code to enjoy this product for FREE – our gift to you, courtesy of REV...

With over 180 parts, the EDU Kit V2 is specifically created to implement hands-on STEM projects in the classroom. This robotics kit is used to teach a variety of lessons ranging from computer programming and engineering principles to project management...

Updated for the 2024-25 season, the FTC Starter Kit V3.1 introduces new and existing REV DUO products so teams can maximize their build. The FTC Starter Kit V3.1 was developed based on feedback from teams to include more of the essential...

The 2 Motor Gearbox - Through Bore is compatible with the REV ION System. This two motor into one output gearbox allows the user to adjust the gear ratio by changing pinion and cluster gear (12:60, 18:54, 24:48, or 36:36). The output shaft is 1/2in...

The 2 Motor Drivetrain Gearbox - Through Bore is compatible with the REV ION System and can be mounted in a variety of options, including flush with tube or spaced away from the tube to enable both chain in tube and chain/belt outside tube designs...

The NEO Brushless Motor is the first brushless motor designed to meet the unique demands of the FRC community. NEO offers an incredible power density due to its compact size and reduced weight. As it is designed to have similar performance...

The MAXPlanetary System is a cartridge-based modular planetary gearbox designed from the ground up for NEO-class motors. The design of the MAXPlanetary has been carefully optimized to provide torque density unavailable in FRC up until now. The...

Now featuring the REV Driver Hub, an easy to use, dependable, and durable device designed for interfacing with the Control Hub. Featuring an Android operating system and built-in dual band Wi-Fi, this device makes getting your robot running easier than...

The 3in MAXSwerve Drivetrain Kit is a complete solution for building a high-performance REV ION drivetrain base, offering the unparalleled control of swerve and the flexibility of MAXTube. It includes four 3in MAXSwerve Modules for a compact and...

An individual cartridge for the MAXPlanetary System. This cartridge is a 9:1 gear reduction.With a 9:1 reduction in a single stage cartridge you will save significant space and weight in your builds that demand the higher reduction!The MAXPlanetary...

The DUO Control Bundle offers basic FTC-legal control system components to get an existing robot up and running. Pair this bundle with the DUO EDU Mechanical Kit (REV-45-2708) to get started with our all-new curriculum, Intro to Robotics I (REV-77-2707),...

The DUO EDU Mechanical Kit is specifically created to implement hands-on STEM projects in the classroom. The DUO EDU Mechanical Kit is the result of over 50 years of experience with competitive robotics with feedback from educators across the world. Pair...

An individual cartridge for the MAXPlanetary System. This cartridge is a 5:1 gear reduction. The MAXPlanetary System is a cartridge-based modular planetary gearbox designed from the ground up for NEO-class motors. The design of the MAXPlanetary has been...

An individual cartridge for the MAXPlanetary System. This cartridge is a 4:1 gear reduction. The MAXPlanetary System is a cartridge-based modular planetary gearbox designed from the ground up for NEO-class motors. The design of the MAXPlanetary has been...

An individual cartridge for the MAXPlanetary System. This cartridge is a 3:1 gear reduction. The MAXPlanetary System is a cartridge-based modular planetary gearbox designed from the ground up for NEO-class motors. The design of the MAXPlanetary has been...

The UltraPlanetary Gearbox Kit comes with UltraPlanetary Cartridges to support six different final gear reductions ranging from nominally 3:1 to 60:1 allowing for the right amount of torque for the application at hand. The kit has a pinion already...

With an efficient right-angle configuration, the Ultra 90 Degree Gearbox offers a robust solution to building a more compact robot. The Ultra 90 Degree Gearbox allows you to connect the UltraPlanetary Gearbox and the HD Hex Motor (REV-41-1600)...

The EDU Kit V2 was specifically created to implement hands-on STEM projects in the classroom. This upgrade bundle bridges the gap between the EDU Kit V2 (REV-45-2041) and the FTC Starter Kit V3.1 (REV-45-3529), providing the needed equipment to...

The C Channel Bundle contains various lengths of 45mm x 15mm C Channel and is designed to work seamlessly with existing DUO 15mm Extrusion. They can be used in locations where additional torsional strength is required. The 45mm wide side of the...

The U Channel Bundle contains multiple lengths of 45mm U Channel and is designed to work seamlessly with existing DUO 15mm Extrusion. The U Channel Endcap and Tensioning Bushing allows users to fine tune their system when designing and...

The Servo Bundle is a one stop shop for getting up and running with the REV Smart Robot Servo. Included in this bundle are all the major electronic and structural accessories for programming, powering, and building using the Smart Robot Servo. Use...

20DP Gears are compatible with the REV ION System and come in a wide range of sizes and bores. Larger gears feature #10 clearance holes arranged in a 2-inch bolt circle pattern and MAXTube mounting pattern. A notch on the bore provides an easy...

The REV USB PS4 Compatible Gamepad is compatible with both the REV DUO and REV ION Systems. Plug the REV Gamepad directly into a Driver Hub to enable feature rich control of your robot. Additionally, when plugged into a PC, it offers an Xbox...

3/8 Nut Strips are compatible with the REV ION System featuring convenient 1/2in spaced #10-32 threaded holes that are inline with each other allowing easy fastening of aligned plates and structure without the need for individual nuts...

20DP Gears are compatible with the REV ION System and come in a wide range of sizes and bores. Larger gears feature #10 clearance holes arranged in a 2-inch bolt circle pattern. A notch on the bore provides an easy visual indicator to ensure gears on the...

The MAXSpline Shaft is compatible with the REV ION System. The shaft is an extruded aluminum MAXSpline that provides a high strength alternative to 1/2in hex shaft that can interface with any REV ION System components with a MAXSpline bore. The...

ION #25 Sprockets are compatible with the REV ION System and designed for use with #25 Roller chain. #25 Plate Sprockets: Featuring MAXSpline and a 2in bolt circle that patterns outward radially, allowing for bolting to structure easily. #25 Hub...

Dead Axle Tube is compatible with the REV ION System and can be used with 3/4in Needle Bearing Carrier (REV-21-2385) and MAXSpline Shaft (REV-21-2520) as the dead axle in a dead axle roller. Can also be used with custom rollers and as...

The 3/4in Needle Bearing Carrier is compatible with the REV ION System and designed for use with the Needle Bearing - 3/4in ID to turn MAXSpline Shaft extrusion into a dead axle roller. Specifications Material: Glass-Filled Nylon ...

MAXHubs are compatible with the REV ION System and provide a way to transfer torque to a MAXSpline bore from shafts of various shapes and sizes. Other hub variants allow for other bores or mount holes to populate within an existing MAXSpline...

MAX Pattern Plates are compatible with the REV ION System and feature the all-new MAX Pattern: a MAXSpline bore surrounded by #10 clearance holes on a 0.5in grid. The plates are available in various lengths, with the pattern repeating every 2in...

The 1in Pivot Joint is compatible with the REV ION System. Create a pivot joint at the end of a piece of MAXTube - 1x1 with Grid Structure. Specifications Material: POM (Acetal/Delrin) Documentation ION Build System Guide Introduction to...

MAXSpline Brackets are compatible with the REV ION System and are designed to mount to pieces of MAXTube - 2x1 - MAX Pattern while maintaining proper pattern spacing. Specifications Material: Aluminum 5052 Weights: MAXSpline Bracket - Stacked: 35g (0...

1in Brackets are compatible with the REV ION System and feature #10 clearance holes on a 1/2in pitch. Using these brackets with any of our MAXTube or ION Extrusion allows for easy construction of robot frames, mechanisms, and structure. Lap Joint...

#10-32 Standoffs are compatible with the REV ION System and provide spacing for mounting key items on your robot. These standoffs are tapped on each end for a #10-32 thread and have a 3/8in flat to flat dimension, similar to a #10-32 nut...

Ratio Plates are compatible with the REV ION System. When you need a ratio other than 1:1, Ratio Plates make it easy to position sprockets and pulleys at the perfect center-to-center distance for the given ratio and length of #25 chain or RT25 belt...

1/2in Rounded Hex Shafts are compatible with the REV ION System and are a ready-to-use length of hex shaft that have been cut to length and have the ends tapped. The ends are tapped #10-32 in order to accept a screw and washer or shaft collar. The 1/2in...

#10 Spacers are compatible with the REV ION System and are an accurate way to space structural components like plates, brackets, or tubes apart on #10 screws. Can also be used to to space motion components like gearboxes away from their mounting...

ION Grip Wheels are compatible with the REV ION System and come in a wide range of sizes, durometers, and bores. Larger wheels contain the MAXSpline bore, but can be adapted to other bores with a separate MAXHub. Wheels with spokes have a bolt...

ION Traction Wheels are compatible with the REV ION System and come in a wide range of sizes, durometers, and bores. Larger wheels contain the MAXSpline bore, but can be adapted to other bores with a separate MAXHub. Wheels with spokes have a bolt circle...

ION Omni Wheels are compatible with the REV ION System and come in a wide range of sizes, all featuring the MAXSpline bore. Other bores are possible with a separate MAXHub. Rollers for each wheel size are unique, which ensures perfectly circular wheels...

ION Compliant Wheels are compatible with the REV ION System and come in a wide range of sizes, durometers, and bores. Larger wheels contain the MAXSpline bore, but can be adapted to other bores with a separate MAXHub. The radial spoke profile allows for...

MAXSpline Spacers are compatible with the REV ION System and can be used on the shaft as a spacer; they also work as spacers between wheels and sprockets, etc. The MAXSpline Spacer with MAX Pattern features a 2in bolt circle pattern.  Specifications...

1/2in Hex Shaft Spacers are compatible with the REV ION System and can be used on the shaft as a spacer; they also work as spacers between wheels and sprockets, etc. Specifications Material: POM (Acetal/Delrin) OD: 0.72in Weights & Dimensions: ...

MAXSpline Spacers are compatible with the REV ION System and can be used on the shaft as a spacer; they also work as spacers between wheels and sprockets, etc. Specifications Material: POM (Acetal/Delrin) OD: 1.50in Weights &...

The REV Power Distribution Hub (PDH) is the latest evolution in power distribution for the FIRST Robotics Competition (FRC).  With 20 high-current (40A max) channels, 3 low-current (15A max), and 1 switchable low-current channel, the PDH...

The REV Mini Power Module (MPM) is a compact power distribution module that allows you to securely and quickly power peripheral devices to your robot. Need more low-current channels on your PDH? Wire the MPM to one of the high-current channels on the PDH...

The REV Radio Power Module is designed to keep one of the most critical system components, the OpenMesh OM5P-AC WiFi radio, powered in the toughest moments of the competition. Traditional barrel jacks easily work themselves loose and often require hacks...

The REV Pneumatic Hub is a standalone module that is capable of switching both 12V and 24V pneumatic solenoid valves. The Pneumatic Hub features 16 solenoid channels which allow for up to 16 single-acting solenoids, 8 double-acting solenoids, or a...

Experience a significantly longer lifespan with the 3in MAXSwerve Plastic Wheel V2.0, designed for the 3in MAXSwerve Module. Now crafted from Glass-Filled Nylon/PP & TPR, it boasts a more rigid rubber tread for increased durability without...

Dinos for a Cause At REV Robotics, we believe in building safe, inclusive, and empowering environments—both within the robotics community and beyond. That’s why we created Dinos for a Cause—an ongoing initiative where proceeds from each...

Upgrade your 3in MAXSwerve Module with this high-performance motor and controller package, featuring the latest NEO Vortex Brushless Motor and SPARK Flex Motor Controllers. Created for maximum efficiency and advanced control, this bundle is perfect for...

Designed specifically for the 2024 FIRST Global Challenge, this kit provides teams with the essential components needed to build a competitive and reliable robot. Packed with a carefully curated selection of mechanical, electrical, and control system...

Commonly included with our gearboxes and pinion options, the 8mm Keyed Shaft Retaining Hardware Pack is compatible with the REV ION System and includes the hardware needed to retain 2mm keyed elements to 8mm OD shafts without the bulk of alternative...

The MAXLift #25 Chain Attachment Plate is a durable yet lightweight aluminum bracket designed for seamless use with the REV ION system within the MAXLift family of products. It simplifies mounting and assembly for elevator and lift systems. Featuring...

The 3in MAXSwerve Module - Kraken Input Kit is a versatile add-on designed to integrate the Kraken X60 motor with the 3in MAXSwerve Module. This kit features a modified 14T pinion gear for seamless power transfer with the 8mm - 15T spline. It includes a...

The MAXPlanetary Kraken X44 & Minion Input Kit is a comprehensive solution for adapting Kraken X44 or Minion motors to the MAXPlanetary system. This kit includes the [REV-21-4444] MAXPlanetary Kraken X44 & Minion Adapter Plate, designed with...

The MAXLift Bearing Blocks are integral components of the MAXLift system, providing teams with a robust and space-efficient solution for building high-performance elevator assemblies. With the main blocks being designed around billet aluminum...

GT2 3mm Pitch Belts are compatible with both the REV ION System and the REV DUO System. These belts go hand in hand with GT2 timing pulleys. Use belts and pulleys in tight to fit areas where adjustment is difficult. Specifications Pitch: 3mm Width:...

Bearings 1/2in Hex Bearing - Flanged - 1.125in OD - 4 Pack (REV-21-1915-PK4) This flanged bearing provides a reliable way to locate and support a 1/2in hex shaft or 1/2in rounded hex shaft while it rotates. The flange ensures secure installation in...

#10-32 Shaft End Screw V1 and V2 are compatible with the REV ION System and are used to retain parts on any ION hex shaft instead of shaft collars. 1/2in Rounded Hex Shafts in various lengths are available and come tapped with #10-32 holes. The...

The 3in MAXSwerve Spiky Wheel - Hub and Tread Bundle includes everything needed to outfit your MAXSwerve-equipped robot with Spiky wheels for enhanced performance. The bundle contains four (4) balanced aluminum hubs, eight (8) Spiky split treads, and...

These ION Motor Brackets are compatible with the REV ION System. The ION UltraPlanetary Face Mount Bracket (REV-21-2046) allows for easy mounting of our UltraPlanetary Gearbox to any of our MAXTube products. Each plate features 2x #10-32 tapped inserts...

Designed for teams requiring higher load capacity in chain-driven systems, the ION #35 Sprockets come in three versatile options, each compatible with the REV ION Build System: #35 Hub Sprockets - 1/2in Hex: Featuring a 1/2in hex bore (rounded for the...

The 3in MAXSwerve Spiky Wheel Aluminum Hub is a durable replacement or backup hub designed specifically for the MAXSwerve system. Pair it with a fresh 3in MAXSwerve Spiky Wheel - Tread (REV-21-3094-PK8) and #10-32 3/8in button head screws for a high...

The 3in MAXSwerve Spiky Wheel Tread is designed for superior grip and performance in competitive robotics. Made from injection-molded thermoplastic polyurethane (TPU) with a Shore A durometer of 95, this tread offers an improved coefficient of friction...

The Aluminum Angle 0.74in x 0.74in is a robust and lightweight solution for attaching and connecting components in your robot design. Made from the same clear anodized aluminum as MAXTube, this angle iron-shaped extrusion is designed for compatibility...

The MAXPlanetary Double Motor Adapter seamlessly integrates with the REV ION Build System, enabling the side-by-side mounting of MAXPlanetaries, UltraPlanetaries, or SPARK Flex/NEO Vortex combos onto MAXTube - 2x1 with MAX Pattern. This compact solution...

#35 Connecting Links are compatible with the REV ION System and are design for use with #35 Roller Chain. Use a #35 Connecting Link to connect two ends of chain to create a loop. Specifications Material: Steel Size: #35 Pitch: 0...

#35 Roller Chain is compatible with the REV ION System. This product is a single strand of #35 Roller Chain for use with ION #35 Sprockets. Use a #35 Connecting Link to connect two ends of chain to create a loop. Specifications Material:...

The #35 Chain Turnbuckle is compatible with the REV ION System. It is designed to adjust the length of a #35 Roller Chain by replacing a few links in a run and also allows the user to tension the chain by adjusting the turnbuckle. The...

The Ballast Block - 3in x 2in x 1in is a steel weight block weighing 1.42 pounds (643g), designed for easy integration with the ION Build System. It features a staggered hole pattern with twenty (20) #10-32 counterbored through holes and twenty (20)...

The Vortex Shaft - 15T Spline, compatible with the REV ION System and gives users the ability to drive inputs that have a 8mm diameter involute 15T spline. Compatible with SplineXS shaft components. Featuring a 1/2in hex section that drives the shaft and...

The 1/2in Hex Bore Shaft Collars are used to prevent gears, sprockets, wheels, and other parts from sliding out of place on a 1/2in hex shaft. All REV 1/2in Hex Bore Shaft Collars feature a boss, or bump out, to contact the inner race of bearings that...

MAXTube is compatible with the REV ION System and is a strong extruded aluminum tubing that features various hole patterns that make robot structures easier to build. Hole patterns range from simple #10 clearance hole grid patterns to a repeated MAX...

MAXTube 2x1 is durable, extruded aluminum tubing optimized for robot structures and fully compatible with the REV ION System. It features #10 clearance holes spaced 0.5 inches apart on all 1-inch sides and offers multiple configurations: solid, grid...

MAXTube 1x1 is a versatile, extruded aluminum tubing designed for building strong, reliable robot structures. Fully compatible with the REV ION System, it features #10 clearance holes spaced 0.5 inches apart on all four sides, simplifying design and...

MAXTube is compatible with the REV ION System and is a strong extruded aluminum tubing that features various hole patterns that make robot structures easier to build. Hole patterns range from simple #10 clearance hole grid patterns to a repeated MAX...

Designed for seamless compatibility with the AMD Kria™ KD240 Drives Starter Kit—or any brushless motor setup—this motor accessory pack empowers developers to evaluate motor control applications using Vitis™ Motor Control Libraries...

The 9-Axis IMU, compatible with the REV DUO System, is a high-performance inertial measurement unit (IMU) featuring the Bosch BNO055 smart sensor with an integrated accelerometer, gyroscope, and magnetometer. Developed to be plug and play with the REV...

The West Coast Drivetrain Kit offers a complete solution for building a robust and efficient differential drive base. Utilizing the classic West Coast drive style, this kit features a six-wheel cantilevered design with live axles and center wheels...