2 Motor Drivetrain Gearbox - Through Bore

The 2 Motor Drivetrain Gearbox - Through Bore is compatible with the REV ION System and can be mounted in a variety of options, including flush with tube or spaced away from the tube to enable both chain in tube and chain/belt outside tube designs. The gearbox can be configured to have 2 motor flipped or up to 3 motor standard. Any combination of mount style and motor configuration can be used, with the exception of flipped motor and flush mounted, with a 6in wheel. The user can adjust speed by switching pinion gears on the motor between 10, 11, 12T, or can adjust wheel size by switching 2nd stage gear pairs. 2 Pairs of 2in pitch #10-32 tapped holes are available on output shaft for mounting the REV Through Bore encoder, and mount holes for the gearbox are on the same horizontal plane as the output, set 4 inches apart. The output shaft is 1/2in Hex through bore, and output gears have a MAXSpline bore.

Specifications

• 2 Motor Drivetrain Gearbox - Through Bore - 4in Wheel Ratio
• Weight: 1.72 lbs
• Material: AL 6061 Plates with steel gears
• 2 Motor Drivetrain Gearbox - Through Bore - 5in Wheel Ratio
• Weight: 1.75 lbs
• Material: AL 6061 Plates with steel gears
• 2 Motor Drivetrain Gearbox - Through Bore - 6in Wheel Ratio
• Weight: 1.61 lbs
• Material: AL 6061 Plates with steel gears

Kit Contents

Product Options *the following items may or may not be included based on your product selection

Documentation

• Coming Soon

CAD

• REV-21-2109 Onshape
• REV-21-2109 Example STEP File
• AllREVPartsSTEPzip