Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
JST PH 6-pin to JST PH 4-pin Cable - 50cm
REV-31-1815$4.00The JST PH 6-pin to JST PH 4-pin Cable allows for seamless connection of the Through Bore Encoder to the dedicated encoder ports on the FTC Control System (Expansion Hub or Control Hub). Also allows for the HD Hex Motor to... -
Color Sensor V3
REV-31-1557$19.00This sensor can be used to read and compare colors, and also has a built-in IR (optical) Proximity Sensor and white LED for active target lighting. Supports High Speed I2C Communication (400kHz) as well as auto increment register read which allows the... -
15mm x 30mm Extrusion - 1m - 90° Ends
$14.00REV Building System also comes in a 15mm x 30mm square extrusion. The slots are designed to fit standard M3 hardware rather than expensive t-nuts. Use the 15mm x 30mm extrusion when more strength is needed for an application. Features All holes can be... -
UltraPlanetary Hardware Pack
REV-41-1609$7.00This is all of the hardware included in the UltraPlanetary Gearbox Kit & HD Hex Motor (REV-41-1600) Kit Contents QTY 6 - M3x40mm QTY 6 - M3x30mm QTY 6 - M3x20mm QTY 6 - M3x10mm QTY 2 - M3x8mm Button head QTY 2 - M3x6mm Set Screw Documentation... -
UltraPlanetary Cartridge - 5:1
REV-41-1603$11.50An individual cartridge for the UltraPlanetary System. This cartridge is nominally a 5:1 gear reduction. The UltraPlanetary System is a cartridge based modular gearbox designed to handle the rigors of the competition and the classroom. Building on the... -
UltraPlanetary Cartridge - 4:1
REV-41-1602$11.50An individual cartridge for the UltraPlanetary System. This cartridge is nominally a 4:1 gear reduction. The UltraPlanetary System is a cartridge based modular gearbox designed to handle the rigors of the competition and the classroom. Building on the... -
UltraPlanetary Cartridge - 3:1
REV-41-1601$11.50An individual cartridge for the UltraPlanetary System. This cartridge is nominally a 3:1 gear reduction. The UltraPlanetary System is a cartridge based modular gearbox designed to handle the rigors of the competition and the classroom. Building on the... -
75mm Mecanum Wheel Set
REV-45-1655$150.00Tested for the rigors of competition, REV Mecanum Wheels are steel plates with rollers supported by ball bearings allowing for the perfect combination of wheel rigidity and roller movement. Included in the set of wheels are Universal Hex Adapter making... -
Control Hub
REV-31-1595$350.00The REV Robotics Control Hub is an affordable all-in-one educational robotics controller. It provides students all the necessary interfaces for robotics and mechatronics projects with multiple programming language options. The Control Hub is... -
1in Extrusion - 4ft
$20.001in Extrusion is compatible with the REV ION System. It’s a 1in x 1in square extruded aluminum tube, with slots designed to fit standard #10 hardware rather than expensive t-nuts. Take your robot mechanisms to a new level of sleekness with the... -
SPARK MAX Data Port Breakout Board
REV-11-1278$10.00The SPARK MAX Data Port Breakout Board makes it easy to connect external sensors to the SPARK MAX Data Port. For additional information on the SPARK MAX Data Port, please take a look at the SPARK MAX User's Manual. Analog Input Issue - Affects Rev. A... -
JST PH 6-pin Breakout Board - 4 Pack
REV-11-1276-PK4$7.50This JST-PH 6-pin Breakout Board is designed to adapt external sensors to the SPARK MAX 6-pin Encoder Port standard. It features a JST PH 6-pin connector, labeled solder pads, and through-hole pads that are compatible with popular 63R style quadrature... -
JST PH 6-pin Joiner Board - 4 Pack
REV-11-1277-PK4$9.00These JST PH 6-pin Joiner Boards are intended to be used with the JST PH 6-pin Extension Cables to extend the reach of your NEO Brushless Motor sensor cables. -
JST PH 6-pin Extension Cable - 4 Pack
REV-11-1275-PK4$16.00These JST PH 6-pin Extension Cables are intended to extend the reach of sensor cables without having to cut and splice wires. Specifications Length: 36in -
SPARK MAX PWM Cable - 2 Pack
REV-11-1274-PK2$4.00These SPARK MAX PWM Cables have a JST-PH 4-pin connector on one end, and a 0.1in 3-pin female PWM connector on the other. They are designed to convert the SPARK MAX Motor Controller's PWM/CAN port to a standard 3-pin PWM port on a robot controller. The... -
PWM Cable Clip - 10 Pack
REV-11-1229-PK10$5.50These plastic clips are designed to keep standard 0.1" 3-pin PWM connectors together. Simply clip them around an assembled pair of connectors. -
SPARK MAX Data Port Cover - 10 Pack
REV-11-1228-PK10$3.50These plastic inserts are designed to go into the SPARK MAX Data Port to protect it from debris. -
Ferrite Cable Clip - 4 Pack
REV-39-1224-PK4$4.50These Ferrite Cable Clips help prevent electromagnetic interference (EMI). They can be clipped around USB and other data cables that are being used in electrically noisy environments. -
JST PH 3-pin Communication Cables
$4.50 - $7.00The 3-pin JST PH Cable is keyed and locking for improved reliability. Use this cable along with an XT30 Extension cable to connect a second REV Robotics Expansion Hub. Expansion Hub 3-pin JST PH Connections: RS485 - Daisy-chain communication to a second... -
Resistive Grounding Strap
REV-31-1269$5.00Safely ground your robot's metal frame with this Resistive Grounding Strap. This strap has a built in 470Ω resistor to prevent high-current discharges while still minimizing the difference in charge between the robot electronics and the frame... -
70 Tooth Metal Gear
REV-41-1662$12.50Metal gears designed to work with REV 5mm hex shafts in high-load applications. REV metal gears are NOT compatible with REV plastic gears. All REV metal gears are narrower than plastic gears, allowing for compact drivetrains and gearboxes within the... -
42 Tooth Metal Gear
REV-41-1664$10.00Metal gears designed to work with REV 5mm hex shafts in high-load applications. REV metal gears are NOT compatible with REV plastic gears. All REV metal gears are narrower than plastic gears, allowing for compact drivetrains and gearboxes within the... -
15mm Hinge Kit
REV-45-1259$11.50Custom hinge system used to create compact, simple hinges using REV DUO 15mm Extrusion. Hinges come in left, right, and center pieces, and are attached together using standard M3 hardware. Specifications Hole Diameter: M3 clearance Hole Spacing: 8mm ... -
15mm Linear Motion Kit V2
REV-45-1507$13.50Updated version of our popular Linear Motion Kit. This kit has been redesigned to be even easier for teams to use with REV 15mm Extrusion to create compact linear slides. New additions to the kit include End Cap pieces to keep lift stages in place,... -
#25 Chain Tool
REV-42-1442$34.50A custom-designed tool that allows teams to easily break and re-assemble #25 chain. The mandrel is used to push out the chain pin. If using master links, the pin can be completely removed, but the depth guide screw allows the option of partially pressing... -
15mm Corner Cube - 8 Pack
REV-41-1562-PK8$17.00Aluminum cubes that allow users to quickly create square assemblies using REV 15mm Extrusion. The cubes are machined from aluminum and feature holes sized to accept standard M3 hardware. 2 pieces of extrusion can be used to create flat assemblies, 3... -
USB Retention Mount and Cable
REV-41-1214$13.50Reduce the number of USB disconnects between the Expansion Hub and your Robot Controller Phone with our USB Retention Mount. When used with the included right-angle USB cable, this mount provides a strong, reliable connection between the cable and the... -
XT30 Power Distribution Block
REV-31-1293$13.50Easily connect multiple devices to your robot battery with the REV XT30 Power Distribution Block. Allows for clean, compact wiring of all your XT30-connected devices. Compatible with: Expansion Hub, Blinkin LED Driver, SPARKmini, Servo Power Module, and... -
2m Distance Sensor
REV-31-1505$29.00The REV Robotics 2m Distance Sensor uses the ST Microelectronics VL53L0X Time-of-Flight (ToF) laser-ranging module to measure distances up to 2 meters with millimeter resolution. Unlike other ranging sensors that rely on the intensity of reflected light,... -
SPARKmini Motor Controller
REV-31-1230$32.00The SPARKmini Motor Controller is an inexpensive in-line brushed DC motor controller designed to offer the same performance characteristics as the Control Hub (REV-31-1595) or Expansion Hub (REV-31-1153) motor ports in a small 60mm x 22mm footprint... -
Expansion Hub Repair Service
REV-31-1153-RFB$115.00This product is an Expansion Hub Repair Service, NOT a way to purchase an Expansion Hub. We strongly recommend reviewing the Expansion Hub Repair portion of our Warranty and Returns page, and contacting support@revrobotics.com before purchasing this... -
Punch Tube - 1m
REV-41-1453$11.50The REV Punch Tube is designed to enable teams to rapidly prototype ideas and build robots without some of the constraints generally associated with extrusion based construction. When paired with our Metric Step Drill (REV-49-1455) and 1/8in or 3.2mm... -
POE Injector Cable
REV-11-1210$11.50The REV POE Injector Cable was specifically designed to address a common problem for many FRC teams with their wireless radios: intermittent power glitches. The wireless radios used in the last several FRC seasons can be powered either through a... -
Blinkin LED Driver
REV-11-1105$46.00Blinkin makes adding LEDs to your robot as simple as driving a motor. Chose the pattern you want and give it the corresponding PWM signal. The REV Blinkin LED Driver is a compact LED driver module that simplifies controlling both 12V RGB LED and 5V... -
20:1 Hex Gearbox & Pinion
REV-41-1064$17.00This gearbox is the same one used on our HD Hex Motor 20:1 Spur Gearbox featuring our 5mm HEX output shaft! This gearbox can be installed on any 550 series motors (like the NeveRest motors from AndyMark) giving you the convenience and... -
15mm Extrusion - 150mm - 45° Ends - 2 Pack
REV-41-1430-PK2$7.00For smaller applications the DUO Build System also comes in a 15mm x 15mm square extrusion. The 15mm profile of the 15mm Extrusion has slots on on all four sides that accept standard M3 hardware. Rather than using a T-nut, which is more expensive, slide... -
15mm Extrusion - 225mm - 90° Ends - 2 Pack
REV-41-1431-PK2$8.50For smaller applications the DUO Build System also comes in a 15mm x 15mm square extrusion. The 15mm profile of the 15mm Extrusion has slots on on all four sides that accept standard M3 hardware. Rather than using a T-nut, which is more expensive, slide... -
15mm Extrusion - 420mm - 90° Ends - 4 Pack
REV-41-1432-PK4$25.00For smaller applications the DUO Build System also comes in a 15mm x 15mm square extrusion. The 15mm profile of the 15mm Extrusion has slots on on all four sides that accept standard M3 hardware. Rather than using a T-nut, which is more expensive, slide... -
Metric Step Drill
REV-49-1455$9.00All the drills you need for FTC in one handy tool! Specifications Maximum material thickness: 3mm Tool material: High-Speed Steel Shank: 0.25in Hex 10 unique diameters 3, 4, 5, 6, 7, 8, 9, 10, 11, & 12 mm Hole Size Compatibility 3mm Clearance... -
JST VH 2-pin Joiner Board - 4 Pack
REV-31-1429-PK4$5.50These small connector boards can be used to join two JST VH 2-pin Motor Cables to create a longer cable. -
M3 Nut - 100 Pack
REV-41-1126-PK100$5.50Zinc plated steel nuts compatible with all REV DUO M3 screws or bolts. This is a plain nut which does NOT contains a nylon insert. Specifications Thread Pitch: M3 x 0.5 Material: Corrosion resistant zinc plated steel Width: 5.5mm Height: 2... -
XT30 Extension Cables
$8.50 - $9.50The XT30 Extension Cable is keyed and locking for improved reliability. Use this cable along with an 3-pin JST PH Cable to connect a second REV Robotics Expansion Hub. Expansion Hub XT30 Connections: Power, One Male and One Female XT30 Connector ... -
JST PH 4-pin Joiner Board - 4 Pack
REV-31-1388-PK4$7.00These small connectors can be used to join two JST PH 4-pin Sensor Cables to create a longer cable. -
JST VH 2-pin Motor Cables
$9.00 - $20.50The 2-pin JST VH Cable is keyed and locking for improved reliability. Expansion Hub 2-pin JST VH Connections: Motor Power Product Options SKU PRODUCT NAME REV-31-1412-PK4 JST VH 2-pin Motor Cable -... -
JST PH 4-pin Sensor Cables
$7.00 - $13.50The 4-pin JST PH Cable is keyed and locking for improved reliability. Expansion Hub 4-pin JST PH Connections: Motor Encoder Digital Analog I2C Product Options SKU PRODUCT NAME REV-31-1407-PK4 JST PH... -
Battery Charger
REV-31-1299$36.50Charger for use with our 12V Slim Battery. The output is wired with an XT30 male connector for charging. For the input, the battery charger has an IEC C13 power cord to standard, grounded, North America wall outlet plug (NEMA 5-15). *Do not... -
Switch Cable and Bracket
REV-31-1387$12.00Add this switch between your battery and Expansion Hub to have convenient on/off control of your robot. We recommend mounting the switch slightly recessed from the outside of your robot so that it's not accidentally turned off by another robot during a... -
Anderson to JST VH Cable - 12 cm - 4 pack
REV-31-1381-PK4$23.00Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub. Teams that already own and use the Anderson Powerpole Crimper may purchase JST VH 2-pin Motor Cables (REV-31-1413), cut cables in... -
Sensor Splitter Cable - 2 Pack
REV-31-1386-PK2$5.50The analog and digital ports on the Control Hub and Expansion Hub combine two sensor inputs into one connector to save space. Single sensors plugged directly into these ports will work, but they will block access to the second input. The Sensor Splitter... -
XT30 Connectors - 5 pairs
REV-31-1399-PK5$11.50Use these connectors to create your own custom length power wires. The XT30 Connector uses a solder cup instead of a crimping tool to connect the contact to a wire. -
Sensor Cable Adapter for Level Converter
REV-31-1384$1.75Cross over cable to convert the pin out from Modern Robotic's I2C sensors to work with the REV Robotics's Logic Level Converter. -
1.2mm UHMWPE Cord - 10M
REV-41-1162$7.00High strength string for use with the small Pulley Bearings and the 15mm Linear Motion Kit to create a powered lift. Specifications Material: Ultra-high-molecular-weight Polyethylene (UHMWPE) Load Rating: 300lb+ Diameter: 1.2mm... -
Anderson Power Pole to XT30 Adapter - 2 Pack
REV-31-1385-PK2$12.508cm long Anderson Power Pole style connector to Female XT30 adapter cable used to covert team-modified battery connectors to the new XT30 connector. Teams that already own and use the Anderson Powerpole Crimper may purchase XT30 Extension Cables... -
Tamiya to XT30 Adapter - 2 Pack
REV-31-1382-PK2$5.008cm long Female Tamiya to Female XT30 adapter cable used to covert legacy battery connectors to the new XT30 standard. -
Touch Sensor
REV-31-1425$8.00Touch sensor is best used for user input, but can also be used as a limit switch. Configuration The REV Touch Sensor is a digital sensor that is wired to the N+1 channel on our standard 4-pin JST PH connector. In other words, the REV Expansion Hub... -
Logic Level Converter
REV-31-1389$7.00The REV Robotics Logic Level Converter is a circuit board which generates a 5V output from the 3.3V input and uses a MOSFET on each signal line to create a bidirectional communication appropriate for a variety of digital signals include I2C communication... -
Battery Holder Plate - 2 Pack
REV-41-1166-PK2$5.50This battery plate is the perfect size to support a REV 12v Battery, REV Control Hub, or REV Expansion Hub. CAD & Drawings REV-41-1166 STEP File REV-41-1166 Onshape REV-41-1166 Drawing -
MiniBot Hardware Kit
REV-45-1171$172.50The MiniBot Hardware Kit is a fast robot build ideal for basic programming training. Add control system components (REV-31-1595 Control Hub, REV-31-1596 Driver Hub, REV-31-1302 12V Slim Battery) and let your programming skills grow. Kit Contents... -
Zip Ties - Black - 160mm - 50 Pack
REV-41-1161-PK50$4.50Nylon Zip Ties with rounded edges to prevent snagging. Length is idea for cable management and many other uses. Specifications 160mm long Quality nylon construction 18lb. tensile strength -
Hook and Loop Fastener - 13.5mm x 2m
REV-41-1373$7.00Double-sided hook and loop tape allows you to cut to desired custom lengths. Reusable, secure hold. Specifications 13.5mm width x 2m length -
5.5mm Combination Wrench
REV-41-1374$10.0012-point combination wrench for use with M3 hardware. Specifications Chrome vanadium steel 5.5mm 15° angled ring head -
Barb for Polyurethane Hollow Belt - 8 Pack
REV-41-1165-PK8$7.50Use these barbs with our Polyurethane Hollow Belt to join the ends and make custom length belts quickly and easily. CAD & Drawings REV-41-1165 Drawing -
Polyurethane Round Belt - 6mm - 6ft
REV-41-1164$8.50Our Polyurethane Hollow Round Belting is perfect for your conveyor, and intake mechanisms. Use Barbs to assemble custom length belts. -
Surgical Tubing - 3mm
REV-41-1163$7.00This stretchy latex rubber tubing is sized to fit through any of the M3 holes in DUO brackets, wheels, gears or other motion products. String tubing between outside holes on two wheels to create a compliant intake. Specifications Color: Black... -
Potentiometer
REV-31-1155$14.00This 10K potentiometer can be used as an analog sensor with the Control Hub or Expansion Hub. This potentiometer has a 270 degree range of motion and can be mounted to any REV DUO brackets with the Motion Pattern, like the Motion Bracket. The... -
REV Robotics Expansion Hub
REV-31-1153$250.00The REV Robotics Expansion Hub is a low-cost educational device that can communicate with any computer (commonly the REV Robotics Control Hub or an Android Phone) to provide the interfaces required for building robots and other mechatronics. The... -
12in PWM Y Cable - 2 Pack
REV-11-1131-PK2$7.00PWM Y-cable, is used for splitting the signal from the roboRIO so you can drive multiple motor controllers or servos from a single source. Specifications Length: 12in Wire colors: white, red, black Wire jacketing: black heat shrink tubing 22 AWG -
36in 2-Wire Jumper Cable
REV-11-1134$2.252-pin header cable that can be used for connecting signals, sensors or any other spots on robots. Features 2 female 0.1in pitch connectors on each end. Specifications Pins: 2 pin Wires: 2 wire Length: 36in -
36in PWM Cable - 4 Pack
REV-11-1130-PK4$11.50PWM Cables, which are used for connecting things like the SPARK Motor controller to the roboRIO. These can also be used as servo extension cables for getting signal and power a bit farther away than integrated wires can reach. Specifications Length:... -
Servo Power Module
REV-11-1144$57.50The Servo Power Module is a 6V 90W power injector that enables the use of high-power RC servos in applications where a robot controller cannot directly provide adequate power. The Servo Power Unit passes through input signals unaltered while... -
40:1 Hex Gearbox & Pinion
REV-41-1065$17.00This gearbox is the same one used on our HD Hex Motor 40:1 Spur Gearbox featuring our 5mm HEX output shaft! This gearbox can be installed on any 550 series motors (like the NeveRest motors from AndyMark) giving you the convenience and... -
Small Pulley Bearings - 10Â Pack
REV-41-1368-PK10$12.50These v-groove bearing pulleys fit on an M3 x 16mm Hex Cap Screw and can be mounted directly onto extrusion. Use with 15mm Linear Motion Kits and a high tensile strength no-stretch string, such as kevlar string or spectra fishing line, to create an... -
#25 Roller Chain - 10 ft
REV-41-1365$17.50Single Strand #25 roller chain for use with #25 sprockets. Use a master link (connecting link) for #25 chain connect two ends of chain to create a loop. Specifications Material: Steel Size: #25 Pitch: 0.25in -
#25 Master Links - 5Â Pack
REV-41-1366-PK5$5.50Master link (connecting link) for #25 chain. Use a master link to connect two ends of chain to create a loop. Specifications Material: Steel Size: #25 Pitch: 0.25in CAD & Drawings REV-41-1366 STEP File REV-41-1366 Onshape -
M3 Nyloc Nuts - 100Â Pack
REV-41-1361-PK100$8.00Zinc plated steel nuts compatible with all REV M3 screws or bolts. Contains a nylon insert which increases grip on screw, reducing the chance of the nut loosening over time. Does NOT fit in the channel of our REV DUO 15mm Extrusion System. Specifications... -
5.5mm Nut Driver
REV-41-1119$7.50Small electronics sized 5.5mm Nut Driver with rubberised grip fits M3 hex cap bolts and nuts. Specifications Socket Depth: 15.8mm Dimensions: 16.2cm x 2cm x 2cm (6.38in x 0.79in x 0.79in) Weight: 33g (1.16oz) -
12V Slim Battery
REV-31-1302$55.00This 10-cell, 12V 3000mAh battery has a low profile configuration to make it easier to mount on a robot. The Slim Battery pack is wired with an XT30 male connector and an inline 20A replaceable ATM fuse. XT30 to Tamiya Adapter no longer automatically... -
Shaft Collars - 10Â Pack
REV-41-1327-PK10$9.00This shaft collar is compatible with the DUO Build System and is used to prevent gears, sprockets, wheels, and other parts from sliding out of place on a 5mm hex shaft. Shaft collars can also be used to prevent the shaft itself from sliding out of its... -
Servo Gear Adapter - 4 Pack
REV-41-1364-PK4$5.50This Servo Gear Adapter is a 15 Tooth Plastic Gear that attaches to any 25T output servo including the Smart Robot Servo. Warning: Gears from other building systems may have a very similar tooth profile but are not an exact match. It may be possible to... -
Servo Shaft Adapter - 4Â Pack
REV-41-1328-PK4$5.50The Servo Shaft Adapter makes it possible to drive a 5mm hex shaft with any 25T output servo including the Smart Robot Servo. The adapter attaches to the servo spline like any common servo horn and accepts a 5mm hex shaft on the opposite end... -
End Cap Bearing - 8Â Pack
REV-41-1322-PK8$6.25The End Cap Bearing is used with the 5mm hex shaft recommended for the DUO Build System 15mm Extrusion to provide a low friction rotating shaft support. This bearing is intended to seat in any of the plastic REV DUO brackets with the 9mm ID bearing seat... -
15mm Plastic Lap Corner Bracket - 8Â Pack
REV-41-1321-PK8$5.50This lap corner bracket is used with the DUO Build System 15mm Extrusion. These plastic brackets have webbing to strengthen the corner and includes a set of alignment ribs on one side designed to seat the bracket into the extrusion channel increasing... -
15mm Plastic Inside Corner Bracket - 8Â Pack
REV-41-1320-PK8$5.50This 90 degree inside corner bracket is used with the DUO Build System 15mm Extrusion. These plastic brackets have webbing to strengthen the corner and includes a set of alignment ribs designed to seat the bracket into the extrusion channel increasing... -
15mm Bearing Pillow Block - 8Â Pack
REV-41-1317-PK8$7.00This bearing pillow block bracket is used with the DUO Build System 15mm Extrusion. The 9mm center hole is use with either the Long Through-bore Bearing (REV-41-1329) or the End Cap Bearing (REV-41-1322) to provide a low friction shaft support. This... -
15mm Hex Pillow Block - 4Â Pack
REV-41-1316-PK4$4.50This bearing pillow block bracket is used with the DUO Build System 15mm Extrusion. The hex center hole fits the 5mm hex shaft. This bracket has alignment ribs on the bottom which help align the bracket with the extrusion channel. Specifications ... -
15mm Extrusion - 1m - 90° Ends
$13.50For smaller applications the DUO Build System also comes in a 15mm x 15mm square extrusion. The 15mm profile of the 15mm Extrusion has slots on on all four sides that accept standard M3 hardware. Rather than using a T-nut, which is more expensive, slide... -
Smart Robot Servo
REV-41-1097$30.00The REV Smart Robot Servo (SRS) is a configurable metal-geared servo that takes the guesswork out of aligning and adjusting servo based mechanisms. One SRS can be used as a standard angular servo, a custom angular servo, and a continuous rotation servo... -
HD Hex Motor No Gearbox
REV-41-1291$20.50The HD Hex series motors and gearboxes feature integrated encoders and power that plug right into the Control Hub (REV-31-1595) and Expansion Hub (REV-31-1153). The gearbox options feature 5mm Hex output or coupler making it easy to connect gears,... -
15mm Extrusion - 120mm - 90° Ends - 2 Pack
REV-41-1568-PK2$5.50For smaller applications the REV Building System also comes in a 15mm x 15mm square extrusion. The slots are designed to fit standard M3 hardware rather than expensive t-nuts. This product is a 2-pack of 120mm pieces of extrusion, for when you... -
NEO 550 Brushless Motor
REV-21-1651$28.00The NEO 550 Brushless Motor is a member in the NEO family of brushless motors. Its output power and small size are specifically designed to make NEO 550 the perfect motor for intakes and other non-drivetrain robot mechanisms. Mounting holes and pilot... -
15mm x 30mm Extrusion - 420mm - 90° Ends - 4 Pack
REV-41-1587-PK4$27.50REV Building System also comes in a 15mm x 30mm square extrusion. The slots are designed to fit standard M3 hardware rather than expensive t-nuts. Use the 15mm x 30mm extrusion when more strength is needed for an application. Features All holes can be... -
45mm U Channel - 440mm
REV-41-1741$19.00REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On the sides of the channel is the Extended Motion... -
Through Bore Encoder
REV-11-1271$48.00The Through Bore Encoder is specifically designed with the end user in mind, allowing teams to place sensors in the locations closest to the rotation that they wish to measure. This rotary sensor measures both relative and absolute position through its... -
8mm x 12mm x 3.5mm Flanged Bearing - 10 Pack
REV-49-1559-PK10$17.00This 8mm x 12mm x 3.5mm Flanged Bearing, when paired with the 5mm Hex to 8mm Round Bearing Insert (REV-41-1528), allows teams to support our 5mm hex shaft with a robust low friction bearing. We recommend mounting the bearing into... -
Core Hex Motor
REV-41-1300$28.50The Core Hex Motor is compatible with the DUO Build System and features a 90 degree orientation and a female output shaft for maximum flexibility and ease of use. Insert any of the REV standard 5mm Hex Shafts into or through the Core Hex Motor to create... -
M3 Ball Joint Rod Ends
$12.50M3 Ball Joint Rod Ends are compatible with the REV DUO System. The Female M3 Ball Joint Rod End (REV-49-1560) can either be paired with its male counterpart to create short linkage arms or with M3 threaded rod and a second female ball...