Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
MAXSwerve Spare Parts
$2.50 - $29.50These spare parts are designed specifically to self service and maintain your 3in MAXSwerve Module (REV-21-3005). Created for efficient repairs and upkeep, routinely servicing your 3in MAXSwerve Module with spare parts will enhance performance and... -
3in MAXSwerve Wheel - Aluminum
REV-21-3002$20.00The 3in MAXSwerve Aluminum Wheel was designed for the 3in MAXSwerve Module. You can attach your favorite tread material to this wheel. REV recommends rough top conveyor belting. A cut template for the wheel tread is available below... -
JST PH 6-pin Extension Cable - 30cm
REV-11-3327$4.00These JST PH 6-pin Extension Cables are intended to extend the reach of sensor cables without having to cut and splice wires. Specifications Length: 30cm Notes As of 01/10/2024, the length on this product page has been corrected from 15cm to 30cm... -
3in MAXSwerve Motor & Controller Bundle
REV-15-2992$256.00This bundle contains the motors and motor controllers needed to run one 3in MAXSwerve Module. Kit Contents SKU PRODUCT NAME QUANTITY REV-11-2158 SPARK MAX Motor... -
Absolute Encoder Adapter
REV-11-3326$10.00Connect the REV Through Bore Encoder directly to the SPARK MAX Data Port using this adapter. This adapter connects the Absolute Duty Cycle output of the Through Bore Encoder to the correct SPARK MAX Data Port pins, leaving the incremental quadrature... -
3/16in Rivets
$6.003/16in Rivets are compatible with the REV ION System are perfect for a variety of applications where a strong, permanent joint is required. Place the rivet into a hole from a single side (a “blind” hole) and then use a rivet... -
Tube Nuts for 3/4in Dead Axle Tube
$10.00Tube Nuts for 3/4in Dead Axle Tube are compatible with the REV ION System. This #10-32 tube nut presses into the end of the tube and supplies a tapped hole for easy mounting. Typically used with dead axle applications. The left-hand threaded... -
#25 Chain Turnbuckle
REV-21-2617$10.00The #25 Chain Turnbuckle is compatible with both the REV ION System and REV DUO System. It is designed to adjust the length of a #25 Chain by replacing a few links in a run and also allows the user to tension the chain by adjusting... -
Rounded UltraHex Shaft - 36in Long
REV-41-3205$12.00The Rounded UltraHex Shaft is compatible with the REV ION System and allows teams to adapt the REV 5mm Hex Shaft family of products to 0.5in Hex applications. It can also be used as a coupler to extend 5mm Hex shafts. Rounded UltraHex... -
MAX 90 Degree Gearbox
REV-21-2120$85.00Designed for use with the REV ION System and with an efficient right-angle configuration, the MAX 90 Degree Gearbox offers a robust and high-performance solution to building a more compact robot. Connect the MAX 90 Degree Gearbox to the MAXPlanetary... -
3in MAXSwerve Module Wheel Hardware Pack
REV-21-2995$30.00The 3in MAXSwerve Module Wheel Hardware Pack was designed for the 3in MAXSwerve Module. This kit is for FRC teams looking to streamline their wheel maintenance at competitions. With this kit, teams can pre-build their wheel assemblies, making... -
#10-32 Ball Joint Rod Ends
$8.00#10-32 Ball Joint Rod Ends are compatible with the REV ION System. Right-hand threaded rod ends tighten when turned clockwise while left-handed threaded rod ends tighten when turned counterclockwise. Specifications Type: Stud-type Rod... -
MK Battery ES17-12 - 2 Pack
REV-19-2487-PK2$100.00The MK Battery ES17-12 is commonly used in FIRST Robotics Competition robots. Specifications Manufacturer: MK Battery Voltage: 12V Capacity: 18AH (20 Hour Rate) Product Dimensions: 7.13in x 2.99in x 6.57in Weight: 12.89lbs Documentation MK... -
Bearing Retaining Plate - 10 Pack
REV-21-2286-PK10$10.00The Bearing Retaining Plate is compatible with the REV ION System and is designed to securely hold bearings in place, ensuring that they remain stable and aligned during use. Made from high-quality, durable materials, the Bearing... -
MAXSpline Bearing Blocks
$14.00 - $24.00MAXSpline Bearing Blocks are compatible with the REV ION System. Quickly add bearing support to any location on REV ION extrusion without the need for precision machining. Can also be used in a west coast style drivetrain to add center wheel drop while... -
MAXTube Endcaps
$5.00 - $7.00MAXTube Endcaps are designed for seamless integration with the REV ION System, providing a simple and effective solution for joining two or more MAXTube extrusions. These endcaps are pre-tapped for #10-32 hardware, ensuring quick assembly and reliable... -
#10-32 Button Head Hex Drive Screws
$4.00 - $11.00Steel hardware of the appropriate size to work with the REV ION System. Length measured from tip to underside of screw head. Documentation ION Build System Guide Hardware Basics Onshape Application Examples Product... -
#10-32 Socket Head Screws
$4.00 - $30.00Steel hardware of the appropriate size to work with the REV ION System. Length measured from tip to underside of screw head. Documentation ION Build System Guide Hardware Basics Onshape Application Examples Product... -
RT25 Pulleys
$6.00 - $12.00RT25 Pulleys can be combined with RT25 Belts to create a power transmission system compatible with the pitch of the ION Build System. RT25 belts and pulleys are comparable to the belts and pulleys that teams are used to using. Belts are lighter than... -
RT25 Belts - 1/2in Width
$2.50 - $14.00RT25 Belts are toothed belts with a 1/4in pitch are compatible with the REV ION System. These belts are comparable in strength to the belts that teams are used to using while working on the pitch of the ION build system. Belts are lighter than... -
ION Servo Accessories
$4.00 - $6.00ION Servo Accessories allow for easy integration into REV ION System. Mount a hobby sided servo, such as the REV Smart Robot Servo, on a 1/2in pitch. Using the adapters, you can convert a servo to a 1/2in Hex shaft for use with all other... -
MAXSpline Shaft Collar - 2 Piece - Aluminum
REV-21-2581$6.50The MAXSpline Shaft Collar is compatible with the REV ION System and provides a simple way to retain items in place on the MAXSpline Shaft. The shaft collar can also be bolted to structure to constrain the axial alignment of MAXSpline Shaft when used in... -
Stepped Bushing - 3/4in ID
REV-21-2396$3.50The Stepped Bushing - 3/4in ID is compatible with the REV ION System. This bushing used in conjunction with the MAXSpline Shaft and Dead Axle Tube - 3/4in can be used to build robust and effective rollers and intakes... -
External Retaining Ring - 3/4in - 10 Pack
REV-21-2394-PK10$6.00The 3/4in External Retaining Ring is compatible with the REV ION System and is used to constrain movement on the Dead Axle Tube - 3/4in for intake and roller applications. Specifications Material: Steel Documentation ION Build System... -
8mm Shaft Spacer - 1/8in - 50 Pack
REV-21-2078-PK50$12.50The 8mm Shaft Spacer is compatible with the REV ION System and is a convenient way to space pinions and gears along the shaft of the NEO Brushless Motor. The 8mm Shaft Spacer is bigger than the 1/2in Hex Adapter and can help keep... -
WAGO 221 Inline Splicing Connector - 12 AWG - 50 Pack
REV-19-2491-PK50$35.00The WAGO 221 Inline Splicing Connector is a robust and easy to use splicing connector that makes fiddling with hard-to-master crimp-style connectors a thing of the past. Simply lift the lever up, insert the stripped wire, and push the lever back down to... -
Elevator Bearing Blocks
$18.50 - $20.00The Elevator Bearing Blocks family offers reliable, versatile solutions for creating linear motion in elevator systems using MAXTube. Both the original Elevator Bearing Block and the Clamping Elevator Bearing Block provide teams with the flexibility to... -
SPARK MAX Mounting Bracket - 2 Pack
REV-21-2468-PK2$6.00Mounting your SPARK MAX Motor Controller (REV-11-2158) has never been easier with the help of the SPARK MAX Mounting Bracket. Configured with a hole pattern compatible with a 1/2in grid and allowing the mode and status light to be seen, this... -
MAXPlanetary 550 Input Kit
REV-21-2117$6.00The MAXPlanetary 550 Input Kit gives users the ability to use 550 size motors with the MAXPlanetary System. Features Does not require permanent modifications to the motor Press-fit shaft adapter avoids set screws that can come... -
MAXPlanetary 775 Input Kit
REV-21-2118$6.00The MAXPlanetary 775 Input Kit gives users the ability to use 775 size motors (775pro or AM RedLine) with the MAXPlanetary System. Features Does not require permanent modifications to the motor Press-fit shaft adapter avoids set screws that... -
10A ATO Auto-resetting Breaker - 4 Pack
REV-11-1860-PK4$24.00REV Robotics custom ATO sized auto-resetting breakers are designed to give reliable protection for FRC robot actuators. These custom developed breakers adhere to SAE Standard J553 and will give consistent performance even after hundreds of breaker... -
20A ATO Auto-resetting Breaker - 4 Pack
REV-11-1861-PK4$24.00REV Robotics custom ATO sized auto-resetting breakers are designed to give reliable protection for FRC robot actuators. These custom developed breakers adhere to SAE Standard J553 and will give consistent performance even after hundreds of breaker trips... -
30A ATO Auto-resetting Breaker - 4 Pack
REV-11-1862-PK4$24.00REV Robotics custom ATO sized auto-resetting breakers are designed to give reliable protection for FRC robot actuators. These custom developed breakers adhere to SAE Standard J553 and will give consistent performance even after hundreds of breaker trips... -
40A ATO Auto-resetting Breaker - 4 Pack
REV-11-1863-PK4$28.00REV Robotics custom ATO sized auto-resetting breakers are designed to give reliable protection for FRC robot actuators. These custom developed breakers adhere to SAE Standard J553 and will give consistent performance even after hundreds of breaker... -
SPARK MAX CAN Cable V2 - 2 Pack
REV-11-1880-PK2$5.50This update to the SPARK MAX CAN Cable bridges the H and L CAN signals together within the cable itself. This prevents the CAN Bus breaking in the event of a cable disconnecting from a SPARK MAX Motor Controller. These SPARK MAX CAN cables have a JST-PH... -
NEO Pinions
$9.00 - $10.00The NEO Pinions are used for transferring power from a NEO Brushless Motor to a mechanism. These pinions come in three different types; either gear, sprocket, or pulley. The pinion gears are compatible with 20DP gears. The pinion sprocket is... -
550 Motor Pinions
$7.00 - $10.00The 550 Motor Pinions are used for transferring power from a 550 class motor, like the HD Hex Motor or NEO 550, to a mechanism. These pinions come in four different types. The 32DP pinion gear is compatible with 32DP gears,the UltraPlanetary Pinion is... -
Digital LED Indicator - Red/Green - 4 Pack
REV-31-2010-PK4$13.50The Digital LED Indicator is a LED signal module that is digitally controlled (active low) and offers three colors: red, green, and amber. The Digital LED Indicator is designed to directly interface with the DIO ports of the Expansion Hub or Control Hub... -
8mm to 1/2in Hex Adapter
REV-21-1879$10.00With the 8mm to 1/2in Hex Adapter you can convert 8mm keyed shafts to drive 0.5in hex bore wheels, sprockets, gears, and more! Use these with any motors with a 8mm round keyed output shaft, like the NEO Brushless... -
36in CAN Extension Cable - 5 Pack
REV-21-2052-PK5$11.50The 36in CAN Extension Cable is a 3-pin connector to interface with existing CAN devices. Specifications Length: 36in (3ft) Wire Colors: yellow, green 22 AWG -
Aluminum Servo Horn V2
REV-41-1828$7.00The Aluminum Servo Horn V2 is compatible with the REV Smart Robot Servo and any other servos with a standard 25T spline. Updates from the original Aluminum Servo Horn include additional tapped M3 Holes for more mounting options, 6 M3 Clearance Holes... -
Alternate Encoder Adapter - 2 Pack
REV-11-1881-PK2$11.50Connect the REV Through Bore Encoder directly to the SPARK MAX Data Port when it is configured in Alternate Encoder Mode using this adapter. This adapter is not intended for use with the default Data Port configuration or with other... -
USB-A to USB-C 2.0 Cable - 2m
REV-11-1232$9.50This is a longer version of the USB-A to USB-C cable included with the SPARK MAX Motor Controller and the Control Hub. Use this cable to connect your SPARK MAX or Control Hub to a standard computer from up to 2 meters away. Features Longer than the... -
4-pin JST PH to 4-pin roboRIO I2C Cable
REV-11-1729$3.50This 4-pin JST PH to 4-pin roboRIO I2C Cable is designed to connect REV I2C sensors, like the REV Color Sensor V3, to the I2C port on the NI roboRIO for use in the FIRST Robotics Competition. Each cable is approximately 36 inches long. This cable... -
JST PH 6-pin to 4 Channel PWM Cable - 1m
REV-11-1817$7.00The JST PH 6-pin to 4 Channel PWM Cable allows for seamless connection of the Through Bore Encoder into the FRC control system (roboRIO). -
UltraPlanetary Hardware Pack
REV-41-1609$7.00This is all of the hardware included in the UltraPlanetary Gearbox Kit & HD Hex Motor (REV-41-1600) Kit Contents QTY 6 - M3x40mm QTY 6 - M3x30mm QTY 6 - M3x20mm QTY 6 - M3x10mm QTY 2 - M3x8mm Button head QTY 2 - M3x6mm Set... -
UltraPlanetary Cartridge - 5:1
REV-41-1603$11.50An individual cartridge for the UltraPlanetary System. This cartridge is nominally a 5:1 gear reduction. The UltraPlanetary System is a cartridge based modular gearbox designed to handle the rigors of the competition and the classroom. Building on the... -
UltraPlanetary Cartridge - 4:1
REV-41-1602$11.50An individual cartridge for the UltraPlanetary System. This cartridge is nominally a 4:1 gear reduction. The UltraPlanetary System is a cartridge based modular gearbox designed to handle the rigors of the competition and the classroom. Building on the...