Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
ION Round Belt System
$6.00 - $30.00The ION Round Belt System provides a simple and adaptable way to transfer power in compact robot mechanisms. Designed around a 2in outer diameter when the belt is installed, the system stays on pitch... -
8mm Shaft Spacer - 1/16in - Plain - 50 Pack
REV-21-4483-PK50$9.00The 8mm Shaft Spacer is a stainless steel 1/16 inch washer designed for precise shaft spacing in FRC and FTC mechanisms. Used on the NEO 2.0 Brushless Motor to achieve correct input coupler alignment... -
MAXPlanetary MAXSpline Output Coupler
REV-21-3630$22.00The MAXPlanetary MAXSpline Output Coupler [REV-21-3630] provides a compact and reliable way to interface a MAXPlanetary Gearbox’s 1/2 inch hex output with MAXSpline Shaft systems. Designed for teams... -
NEO 2.0 Sensor Cable
REV-11-1287$5.00The NEO 2.0 Sensor Cable connects the NEO 2.0 Brushless Motor’s sensor port to a standard JST PH 6-pin interface used on REV motor controllers. The 2x3-pin PHSD connector provides a secure, latching... -
ION Cone Wheels
$6.00 - $8.00ION Cone Wheels are designed to give teams controlled, predictable vectoring for game pieces and objects. Their tapered profile naturally guides items toward the smaller diameter, making them... -
4in Spiky Wheel - Tread - 8 Pack
REV-21-4419-PK8$32.00The 4in Spiky Wheel Tread 8 Pack provides replacement treads for teams using the 4in Spiky Wheels on their EasySwerve-equipped robots. These injection molded TPU treads feature an aggressive spiked... -
4in Spiky Wheel - Aluminum Hub
REV-21-4418$30.00The 4in Spiky Wheel Aluminum Hub is a precision machined and balanced wheel hub designed for use with the 4in Spiky Wheel system and the 4in EasySwerve Module. Built from 6061 aluminum, this hub... -
20DP Gear - 15T Spline
$12.00 - $14.0020DP Gears are compatible with the REV ION System and come in a wide range of sizes and bores. This gear features a 15T spline bore for use with 15T spline shaft and motors like our NEO 2.0 Brushless... -
MAXSpline Grommet - 10 Pack
REV-21-3640-PK10$10.00The MAXSpline Grommet provides a simple way to route wires through MAXTube while preventing abrasion against bare aluminum. Made from pliable 60A rubber, it press-fits into the MAXSpline Bore on... -
4in Spiky Wheel - Hub and Tread Bundle
REV-25-3171$152.00The 4in Spiky Wheel - Hub and Tread Bundle includes everything needed to outfit a full 4in EasySwerve drive with high-traction 4in Spiky Wheels and a complete set of replacement treads. The bundle... -
15T Spline to 1/2in Hex Adapter
REV-21-4484$11.00The 15T Spline to 1/2in Hex Adapter provides a simple and reliable way to integrate motors with a 15T spline output shaft into mechanisms designed around 1/2in rounded hex. This adapter is ideal for... -
15T Spline Shaft - 480mm
REV-41-6457$16.00The 15T Spline Shaft is a solid stainless steel shaft sized at 480mm for long span applications or to be used as stock to cut custom length shafts. Its 15 tooth involute spline profile features an... -
MAXPlanetary 2:1 Cartridge
REV-21-2140$45.00An individual cartridge for the MAXPlanetary System. This cartridge is a 2:1 gear reduction. The 2:1 cartridge expands MAXPlanetary ratio options, joining the 1:1 (no cartridge), 3:1, 4:1, 5:1, and... -
Elevator Bearing Block - 2 Pack
REV-20-2051-PK2$18.50$15.73The Elevator Bearing Block (REV-20-2051) is a trusted choice for smooth sliding motion between two pieces of rectangular tubing. It mounts on the narrow, 1in side, of tubing (e.g. 1x1 or 2x1) and... -
Helical 550 Motor Pinion Gear - 12 Tooth - 2 Pack
REV-41-2719-PK2$7.00$5.95The 550 Motor Pinions are used for transferring power from a 550 class motor, like the HD Hex Motor or NEO 550, to a mechanism. The Helical 550 Motor Pinion with 12 teeth is used exclusively -
Through Bore Encoder V2
REV-11-3174$48.00The Through Bore Encoder V2 provides precise, reliable shaft position measurement with both incremental (ABI quadrature) and absolute (pulse-width) outputs. Its ½in hex through bore mounts easily... -
DUO Metal #25 Sprockets
$5.00 - $12.50Metal sprockets designed to work in high-load applications with #25 chain. This sprocket requires a hub like REV-41-1719. Specifications Chain Size: #25 Material: 6061... -
15mm Extrusions
$6.00 - $29.75REV Building System also comes in a 15mm x 30mm square extrusion. The slots are designed to fit standard M3 hardware rather than expensive t-nuts. Use the 15mm x 30mm extrusion when more strength is... -
45mm U Channels
$2.50 - $44.00REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On... -
45mm x 15mm C Channels
$4.50 - $31.00REV 45mm x 15mm C Channel has a 45mm x 15mm rectangular profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsional strength... -
UltraUSB Hub and Cables
$4.00 - $25.00The UltraUSB Hub is designed specifically for use in competitive robotics, and gives you the ability to connect multiple USB devices to each other as well as replacing cables when damaged instead of... -
JST PH 6-pin Extension Cables
$4.50 - $17.50These JST PH 6-pin Extension Cables are intended to extend the reach of sensor cables without having to cut and splice wires. Specifications REV-11-1275-PK4: Length: 90cm (35... -
45mm Flat Plates
$2.50 - $12.50REV 45mm Flat Plate is a 45mm wide, bendable metal featuring the Extended Motion Pattern. This product is a piece that is 440mm long. The Extended Motion Pattern supports M3 hardware for attaching... -
15mm Corner Brackets
$6.00 - $12.50This 90 degree inside corner bracket (REV-41-1320-PK8) is used with the DUO Build System 15mm Extrusion. These plastic brackets have webbing to strengthen the corner and includes a set of alignment... -
ATO Auto-resetting Breakers
$26.00 - $30.00REV Robotics custom ATO sized auto-resetting breakers are designed to give reliable protection for FRC robot actuators. These custom developed breakers adhere to SAE Standard J553 and will give... -
15mm Pillow Blocks
$5.00 - $7.75This bearing pillow block bracket (REV-41-1317) is used with the DUO Build System 15mm Extrusion. The 9mm center hole is use with either the Long Through-bore Bearing (REV-41-1329) or the End Cap... -
#10-32 Button-head Socket Cap Screws - 100 Pack
$9.00Steel hardware of the appropriate size to work with the ION Build System 1in Extrusion. Length measured from tip to underside of screw head. Specifications Material: 18-8 Stainless Steel Diameter &... -
M3 Nut Strips
$2.50 - $5.50The REV M3 Nut Strip allows you to securely join plates and channels without the need for separate nuts. Simply thread bolts directly into the strip for fast and reliable assembly... -
WERA Hex-Plus L-Keys
$6.00Hex keys, also known as Allen wrenches or L-keys, are essential hand tools designed to drive screws and bolts with hexagonal recesses. They are widely used in robotics, engineering, and general... -
2025 FIRST Global Competition Kit
REV-41-3690$2,800.00Designed specifically for the 2025 FIRST Global Challenge, this kit provides teams with the essential components needed to build a competitive and reliable robot. Packed with a carefully curated... -
Smart Robot Servos V2
$32.50The REV Smart Robot Servo V2 – available in Balanced and UltraSpeed configurations – is a fully configurable metal-geared servo designed to simplify servo-based mechanisms. Each SRS V2 can be used as... -
3in MAXSwerve Motor & SPARK Flex Bundle
REV-15-2993$400.00Upgrade your 3in MAXSwerve Module with this high-performance motor and controller package, featuring the latest NEO Vortex Brushless Motor and SPARK Flex Motor Controllers. Created for maximum... -
8mm Keyed Shaft Retaining Hardware Pack
REV-21-2907$2.25Commonly included with our gearboxes and pinion options, the 8mm Keyed Shaft Retaining Hardware Pack is compatible with the REV ION System and includes the hardware needed to retain 2mm keyed... -
MAXLift #25 Chain Attachment Plate - 2 Pack
REV-21-3535-PK2$13.00The MAXLift #25 Chain Attachment Plate is a durable yet lightweight aluminum bracket designed for seamless use with the REV ION system within the MAXLift family of products. It simplifies mounting... -
3in MAXSwerve Module – 15T Spline Input Kit
REV-21-3009$43.25The 3in MAXSwerve Module – 15T Spline Input Kit is designed to adapt the REV NEO 2.0 Brushless Motor or Kraken X60 for use with the 3in MAXSwerve Module. This kit provides the necessary gearing and... -
MAXPlanetary Kraken X44 & Minion Input Kit
REV-21-2139$16.25The MAXPlanetary Kraken X44 & Minion Input Kit is a comprehensive solution for adapting Kraken X44 or Minion motors to the MAXPlanetary system. This kit includes the [REV-21-4444] MAXPlanetary Kraken...