Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Driver Hub Repair Service
REV-31-1596-RFB$125.00This product is a Driver Hub Repair Service, NOT a way to purchase a Driver Hub. We strongly recommend reviewing the Driver Hub Repair portion of our Warranty and Returns page, and contacting suppo -
3in MAXSwerve Motor & Controller Bundle
REV-15-2992$280.00Power your 3in MAXSwerve Module with this proven motor and controller setup, featuring the NEO Brushless Motor and SPARK MAX Motor Controllers. Designed to work seamlessly with the 3in MAXSwerve... -
3/16in Rivets
$6.503/16in Rivets are compatible with the REV ION System are perfect for a variety of applications where a strong, permanent joint is required. Place the rivet into a hole from a single side (a “blind”... -
Tube Nuts for 3/4in Dead Axle Tube
$11.00Tube Nuts for 3/4in Dead Axle Tube are compatible with the -
#25 Chain Turnbuckle
REV-21-2617$11.00The #25 Chain Turnbuckle is compatible with both the REV ION System and REV DUO System. It is designed to adjust the length of a #25 Chain by -
Rounded UltraHex Shaft - 36in Long
REV-41-3205$13.00The Rounded UltraHex Shaft is compatible with the REV ION System and allows teams to adapt the REV 5mm Hex Shaft family of products to 0.5in Hex applications. It can also be used as a coupler to... -
MAX 90 Degree Gearbox
REV-21-2120$95.00Designed for use with the REV ION System and with an efficient right-angle configuration, the MAX 90 Degree Gearbox offers a robust and high-performance solution to building a more compact robot... -
3in MAXSwerve Module Wheel Hardware Pack
REV-21-2995$32.50The 3in MAXSwerve Module Wheel Hardware Pack was designed for the 3in MAXSwerve Module. This kit is for FRC teams looking to streamline their wheel maintenance at competitions. With this kit, teams... -
MAXPlanetary 14T Spline Input Coupler
REV-21-2124$8.00$6.80The MAXPlanetary 14T Spline Input Coupler's (REV-21-2124) ISO standard 8mm 14T spline is compatible with the Falcon 500 shaft spline. Specifications Material: Steel Weight: MAXPlanetary 14T Spline... -
#10-32 Ball Joint Rod Ends
$8.75#10-32 Ball Joint Rod Ends are compatible with the REV ION System. Right-hand threaded rod ends tighten when turned clockwise while left-handed threaded rod ends tighten when turned counterclockwise... -
Mecanum Drivetrain Kit V2
REV-45-2470$520.00The Mecanum Drivetrain Kit V2 provides everything needed to build an omnidirectional drivetrain. Featuring Ultra 90 Degree Gearboxes, this kit positions the motors directly within the drive channels... -
MK Battery ES17-12 - 2 Pack
REV-19-2487-PK2$120.00The MK Battery ES17-12 is commonly used in FIRST Robotics Competition robots. Specifications Manufacturer: MK Battery Voltage: 12V Capacity: 18AH (20 Hour Rate) Product Dimensions: 7.13in x 2.99in x... -
Bearing Retaining Plate - 10 Pack
REV-21-2286-PK10$11.00The Bearing Retaining Plate is compatible with the REV ION System -
M3 Nylon Unthreaded Spacers
$3.25M3 Spacers are compatible with the REV DUO System and accurate way to space gears, sprockets, wheels, and other parts on a -
M3 Stainless Steel Washer - 100 Pack
REV-41-2886-PK100$6.50Washer for use with REV DUO M3 hardware. -
MAXSpline Bearing Blocks
$15.25 - $26.00MAXSpline Bearing Blocks are compatible with the REV ION System. Quickly add bearing support to any location on REV ION extrusion without the need for precision machining. Can also be used in a west... -
MAXTube Endcaps
$5.50 - $7.75MAXTube Endcaps are designed for seamless integration with the REV ION System, providing a simple and effective solution for joining two or more MAXTube extrusions. These endcaps are pre-tapped for... -
5mm Hex Shafts
$12.50 - $23.255mm Hex Shafts are compatible with the REV DUO System. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable set screws. REV shafts are made out of... -
DUO Omni Wheels
$27.00 - $31.00DUO Omni Wheels are compatible with the REV DUO System and have rollers mounted around the outside which passively rotate at 90 degrees to the powered direction of the wheel. DUO Omni Wheels can be... -
DUO Traction Wheels
$12.50 - $20.00DUO Traction Wheels are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable set... -
DUO Round Belt Pulleys
$8.75 - $11.00DUO Round Belt Pulleys are compatible with the REV DUO System and are perfect for your conveyor and intake mechanisms when combined with Polyurethane Hollow Round Belting. Documentation -
Through Bore Bearings
$5.00 - $7.75Through Bore Bearings are compatible with the REV DUO System and are used with 5mm Hex Shafts recommend for the DUO Extrusion System to provide a low friction rotating shaft support. These low... -
5mm Hex Spacers
$6.00 - $7.755mm Hex Spacers are compatible with the REV DUO System and accurate way to space gears, sprockets, wheels, and other parts along a 5mm hex shaft. Mix and match various spacer lengths to adjust... -
5mm Metal Hex Bore Gears
$9.75 - $10.005mm Metal Hex Bore Gears are compatible with the REV DUO System and work with REV 5mm hex shafts in high-load applications. REV metal gears are NOT compatible with REV plastic gears. All REV metal... -
5mm Plastic Hex Bore Gears
$5.00 - $8.755mm Plastic Hex Bore Gears are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable... -
UltraPlanetary Brackets
$7.75UltraPlanetary Brackets are compatible with the REV DUO System. Each bracket includes holes on an 8mm grid that is compatible with many other building systems. The UltraPlanetary Outside Mounting... -
DUO Plastic #25 Sprockets
$5.00 - $8.75DUO Plastic #25 Sprockets are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable... -
15mm Metal Motion Brackets
$5.50 - $6.0015mm Metal Brackets are compatible with the REV DUO System. Each bracket includes holes on an 8mm grid that is compatible with many other building systems. The 15mm Metal Bent Core Hex Motor Bracket... -
15mm Metal Brackets
$12.5015mm Metal Brackets are compatible with the REV DUO System. Each bracket includes holes on an 8mm grid that is compatible with many other building systems. Specifications Material: 6061... -
15mm Plastic Motion Brackets
$4.00 - $6.0015mm Plastic Motion Brackets are compatible with the REV DUO System. Each bracket features a set of alignment ribs designed to seat the bracket into the extrusion channel increasing joint alignment,... -
15mm Plastic Brackets
$5.00 - $6.0015mm Plastic Brackets are compatible with the REV DUO System. Each bracket includes a set of alignment ribs designed to seat the bracket into the extrusion channel increasing joint alignment,... -
#10-32 Button Head Hex Drive Screws
$4.50 - $12.00Steel hardware of the appropriate size to work with the REV ION System. Length measured from tip to underside of screw head. Documentation ION Build System Guide -
#10-32 Socket Head Screws
$4.50 - $32.50Steel hardware of the appropriate size to work with the REV ION System. Length measured from tip to underside of screw head. Documentation ION Build System Guide -
RT25 Pulleys
$6.50 - $13.00RT25 pulleys pair with RT25 belts to create a power transmission system that matches the exact pitch of #25 chain while aligning with the 1/2in ION Build System pitch. This makes RT25 a drop in... -
RT25 Belts - 1/2in Width
$2.75 - $15.25RT25 Belts are toothed belts with a 1/4in pitch are compatible with the REV ION System. These belts are comparable in strength to the belts that teams are used to using while working on the pitch of... -
ION Servo Accessories
$4.50 - $6.50ION Servo Accessories allow for easy integration into REV ION System. Mount a hobby sided servo, such as the REV Smart Robot Servo, on a 1/2in pitch. Using the adapters, you can convert a servo to a...