Competition

The 36in CAN Extension Cable is a 3-pin connector to interface with existing CAN devices.  Specifications Length: 36in (3ft) Wire Colors: yellow, green 22 AWG

The Aluminum Servo Horn V2 is compatible with the REV Smart Robot Servo and any other servos with a standard 25T spline. Updates from the original Aluminum Servo Horn include additional tapped M3 Holes for more mounting options, 6 M3 Clearance Holes...

This product has been discontinued as of 07/15/2024 and replaced with (REV-31-2983) REV USB PS4 Compatible Gamepad. The Etpark Wired Controller is a legal gamepad for the FIRST Tech Challenge program. This controller...

The M3 Hardware Bundle provides a multitude of hardware options that can be used within the 15mm Build System. The focus of the bundle is on compatibility with structural components like Extrusion and Brackets. Use this bundle to restock your...

The FTC Timing Belt and Pulley Bundle contains an assortment of components needed for a pulley-based motion transmission system. Timing Belts and Pulleys are lighter, more compact, and more efficient at transferring motion than chain and sprockets...

The 5mm Hex Shaft and Spacer Bundle features an assortment of REV products that work to transmit intended motion and constrain unintended motion in the DUO Build System. Use this bundle to restock your existing shaft and spacer supply, or as a great...

The FTC Cable Bundle offers a plethora of major cables and other accessories for a variety of robot design needs, without having to sacrifice wiring best practices. Necessary cables, like the XT30 Extension Cable, come in two different...

The M3 Standoff Bundle is perfect for raising one assembly above another or as linkages. Standoffs are also commonly used with REV DUO C Channel to properly space the channel in order to allow chains or belts to fit inside. Use this bundle to...

The FTC Bearing Bundle offers a plethora of motion support components for the DUO Build System. The basics of motion support can be found on the Supporting Motion documentation page. Use this bundle to restock your existing bearing supply, or as a...

The C Channel Bundle contains various lengths of 45mm x 15mm C Channel and is designed to work seamlessly with existing DUO 15mm Extrusion. They can be used in locations where additional torsional strength is required. The 45mm wide side of the...

The U Channel Bundle contains multiple lengths of 45mm U Channel and is designed to work seamlessly with existing DUO 15mm Extrusion. The U Channel Endcap and Tensioning Bushing allows users to fine tune their system when designing and...

The Servo Bundle is a one stop shop for getting up and running with the REV Smart Robot Servo. Included in this bundle are all the major electronic and structural accessories for programming, powering, and building using the Smart Robot Servo. Use...

The #25 Chain and Metal Sprocket Bundle can be used to change the speed, torque or direction of a motor. The DUO Build System is designed around #25 Roller Chain (REV-41-1365) using compatible #25 Sprockets. The bundle also includes the...

The 15mm Extrusion Lift Kit offers an assortment of components needed to build an un-powered 3-stage continuous or cascading lift. The basics of the linear motion kit can be found on the Introduction to Linear...

The FTC Sensor Bundle offers an assortment of REV Sensors and sensor accessories to help your robot understand the world around it. Use this bundle to restock your existing sensor supply, or as a great starting point for a new FTC team...

Tote around your extra robot parts with the classic REV Storage Tote. This is the same tote included with the FTC Starter Kit V3 and FTC Starter Kit V2. Specifications Color: Orange Width: 22in Height: 13.79in Depth: 9in

Custom zinc plated steel drop-in hardware to work with the 15mm Extrusion system. Length measured from tip to underside of hex cap. Specifications Thread Pitch: M3 x 0.5 Material: Corrosion resistant zinc plated steel Length:...

This Motion Pattern Spacer offers a convenient and accurate way to space gears, sprockets, wheels, and other parts through the Motion Pattern interface. Great for getting the proper spacing when face mounting to the UltraPlanetary Gearbox...

This product has been discontinued as of 08/02/2024 and will be replaced with a new kit in Fall 2024. The FTC Starter Kit V3 was created based on feedback from teams to give you more of the parts that teams need for being competitive at FIRST Tech...

This product has been discontinued as of 08/14/2024 and replaced with (REV-45-3529) FTC Starter Kit V3.1. The FTC Starter Kit V3 has over 1400 parts and was created based on feedback from teams to give you more of the parts that teams need for being...

Connect the REV Through Bore Encoder directly to the SPARK MAX Data Port when it is configured in Alternate Encoder Mode using this adapter. This adapter is not intended for use with the default Data Port configuration or with other...

This is a longer version of the USB-A to USB-C cable included with the SPARK MAX Motor Controller and the Control Hub. Use this cable to connect your SPARK MAX or Control Hub to a standard computer from up to 2 meters away. Features Longer than the...

This 4-pin JST PH to 4-pin roboRIO I2C Cable is designed to connect REV I2C sensors, like the REV Color Sensor V3, to the I2C port on the NI roboRIO for use in the FIRST Robotics Competition. Each cable is approximately 36 inches long. This cable...

The JST PH 6-pin to 4 Channel PWM Cable allows for seamless connection of the Through Bore Encoder into the FRC control system (roboRIO).