Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
JST PH 3-pin Communication Cables
$5.00 - $7.75The 3-pin JST PH Cable is keyed and locking for improved reliability. Use this cable along with an XT30 Extension cable to connect a second REV Robotics Expansion Hub. Expansion Hub 3-pin JST PH... -
Resistive Grounding Strap
REV-31-1269$5.50Safely ground your robot's metal frame with this Resistive Grounding Strap. This strap has a built in 470Ω resistor to prevent high-current discharges while still minimizing the difference in charge... -
USB Retention Mount and Cable
REV-41-1214$13.50Reduce the number of USB disconnects between the Expansion Hub and your Robot Controller Phone with our USB Retention Mount. When used with the included right-angle USB cable, this mount provides a... -
XT30 Power Distribution Block
REV-31-1293$14.75Easily connect multiple devices to your robot battery with the REV XT30 Power Distribution Block. Allows for clean, compact wiring of all your XT30-connected devices. Compatible with: Expansion Hub,... -
2m Distance Sensor
REV-31-1505$31.50The REV Robotics 2m Distance Sensor uses the ST Microelectronics VL53L0X Time-of-Flight (ToF) laser-ranging module to measure distances up to 2 meters with millimeter resolution. Unlike other ranging... -
SPARKmini Motor Controller
REV-31-1230$35.00The SPARKmini Motor Controller is an inexpensive in-line brushed DC motor controller designed to offer the same performance characteristics as the Control Hub (REV-31-1595) or Expansion Hub ( -
Expansion Hub Repair Service
REV-31-1153-RFB$125.00This product is an Expansion Hub Repair Service, NOT a way to purchase an Expansion Hub. We strongly recommend reviewing the Expansion Hub Repair portion of our Warranty and Returns page, and... -
Blinkin LED Driver
REV-11-1105$49.68Blinkin makes adding LEDs to your robot as simple as driving a motor. Chose the pattern you want and give it the corresponding PWM signal. The REV Blinkin LED Driver is a compact LED driver module... -
XT30 Extension Cables
$9.25 - $10.50The XT30 Extension Cable is keyed and locking for improved reliability. Use this cable along with an 3-pin JST PH Cable to connect a second REV Robotics Expansion Hub. Expansion Hub XT30 Connections:... -
JST VH 2-pin Motor Cables
$9.75 - $22.25The 2-pin JST VH Cable is keyed and locking for improved reliability. Expansion Hub 2-pin JST VH Connections: Motor Power Product Options -
JST PH 4-pin Sensor Cables
$7.75 - $14.75The 4-pin JST PH Cable is keyed and locking for improved reliability. Expansion Hub 4-pin JST PH Connections: Motor Encoder Digital Analog I2C Product Options -
Switch Cable and Bracket
REV-31-1387$13.00Install this switch between your battery and Control Hub or Expansion Hub for convenient on/off control of your robot. We recommend mounting the switch slightly recessed from the robot’s exterior to... -
Anderson to JST VH Cable - 12 cm - 4 pack
REV-31-1381-PK4$25.00Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub. Teams that already own and use the Anderson Powerpole Crimper may purchase... -
Sensor Splitter Cable - 2 Pack
REV-31-1386-PK2$6.00The analog and digital ports on the Control Hub and Expansion Hub combine two sensor inputs into one connector to save space. Single sensors plugged directly into these ports will work, but they will... -
XT30 Connectors - 5 pairs
REV-31-1399-PK5$12.50Use these connectors to create your own custom length power wires. The XT30 Connector uses a solder cup instead of a crimping tool to connect the contact to a wire. -
Sensor Cable Adapter for Level Converter
REV-31-1384$2.00Cross over cable to convert the pin out from Modern Robotic's I2C sensors to work with the REV Robotics's Logic Level Converter. -
Touch Sensor
REV-31-1425$8.75Touch sensor is best used for user input, but can also be used as a limit switch. Configuration The REV Touch Sensor is a digital sensor that is wired to the N+1 channel on our standard 4-pin JST PH... -
Logic Level Converter
REV-31-1389$7.75$3.00The REV Robotics Logic Level Converter is a circuit board which generates a 5V output from the 3.3V input and uses a MOSFET on each signal line to create a bidirectional communication appropriate for... -
Potentiometer
REV-31-1155$15.25This 10K potentiometer can be used as an analog sensor with the Control Hub or Expansion Hub. This potentiometer has a 270 degree range of motion and can be mounted to any REV DUO brackets with the... -
REV Robotics Expansion Hub
REV-31-1153$275.00The REV Robotics Expansion Hub is a low-cost educational device that can communicate with any computer (commonly the REV Robotics Control Hub or -
12V Slim Battery
REV-31-1302$60.00This 10-cell, 12V 3000mAh battery has a low profile configuration to make it easier to mount on a robot. The Slim Battery pack is wired with an XT30 female connector and an inline 20A replaceable ATM... -
Through Bore Encoder V1
REV-11-1271$48.00$40.80The Through Bore Encoder V1 allows teams to place sensors in the locations closest to the rotation that they wish to measure. This rotary sensor measures both relative and absolute position through... -
5V Addressable LED Strip - 1m
REV-11-1198$26.00This 5V WS2812B Addressable RGB LED Strip is compatible with the REV Blinkin LED Driver (REV-11-1105). Each LED contains an integrated driver IC and three LEDs; a red, green, and blue LED. Each... -
12V RGB LED Strip - 5m
REV-11-1197$28.75This 12V RGB LED Strip is compatible with the REV Blinkin LED Driver (REV-11-1105). Each LED on the strip is wired in parallel and actually contains three embedded LEDs; a red, green, and blue LED...