Description
The 8mm Vortex Shaft, compatible with the REV ION System, empowers you to utilize the NEO Vortex Brushless Motor with any 8mm keyed shaft component. This interchangeability also means that the NEO Vortex matches the output of a NEO Brushless Motor V1.1, making it a seamless drop-in replacement for your designs.
The Vortex Shaft - Falcon Compatible Spline is compatible with the REV ION System and gives users the ability to drive components that have a falcon spline bore. *Falcon is not a REV trademark.
The Vortex Shaft - MAXSwerve Integrated Key is compatible with the REV ION System and gives users the ability to drive a MAXSwerve Module without the need for the MAXSwerve Key. This eliminates a potential point of failure in the MAXSwerve since the key is machined directly into the 8mm shaft
The Vortex MAXPlanetary Input Kit is compatible with the REV ION System and gives users the ability to mount a MAXPlanetary Gearbox directly to your NEO Vortex Brushless Motor and SPARK Flex Motor Controller.
Working seamlessly with the MAXPlanetary Vortex Input Stage, the Vortex Shaft - MAXPlanetary Input Coupler reduces gearbox length for more efficient designs. Note that the MAXPlanetary Vortex Input Stage is required for this setup.
The Vortex Shaft - 15T Spline, compatible with the REV ION System and gives users the ability to drive inputs that have a 8mm diameter involute 15T spline. Compatible with SplineXS shaft components.
The Vortex Shaft - 20DP Gear - 7T is compatible with the REV ION System and offers users the unique ability to achieve substantial gear reductions directly from the motor. This gear features a 7T 20DP design that is typically too small for an 8mm keyed input. However, it becomes possible when integrated into the motor shaft.
The Vortex Shaft - 20DP Gear - 7T is addendum shifted to an 8T pitch diameter. This allows you to calculate center-to-center distances as if it were an 8T gear rather than a 7T. This feature streamlines your gear reduction calculations and ensures precision in your designs.
Featuring a 1/2in hex section that drives the shaft and a built-in taper for effortless self-centering, much like a milling machine. When you secure the shaft using a #10-32 Shaft End Screw, the taper keeps your shaft perfectly centered as it's drawn in and locked into place within the NEO Vortex.
Specifications
- Vortex Shaft 8mm
- Shaft Weight: 56g (0.12lb)
- Material: Stainless Steel
- Finish: Plain
- Exposed Shaft Length: 35.4mm (1.39in)
- Diameter: 8mm
- Keyway Width: 2mm
- Keyway Overall Length: 24mm
- Draw Screw Threads: #10-32
- Shaft End Threads: #10-32
- Vortex Shaft - Falcon Compatible Spline
- Weight: 52g (0.11lb)
- Material: Stainless Steel
- Finish: Plain
- Exposed Shaft Length: 35.2mm (1.38in)
- Shaft Type: Involute Spline
- Module: 0.5
- Pressure Angle: 30°
- Teeth: 14
- Fit Class: H/e
- Draw Screw Threads: #10-32
- Shaft End Threads: #8-32
- Vortex Shaft - MAXSwerve Integrated Key
- Shaft Weight: 50g (0.11lb)
- Material: Stainless Steel
- Finish: Plain
- Diameter: 8mm
- Keyway Width: 2mm
- Draw Screw Threads: #10-32
- Vortex MAXPlanetary Input kit
- Total Weight: 94g (0.21lb)
- Shaft Weight: 51g (0.11lb)
- Material: Stainless Steel
- Output Type: Socket MAXPlanetary Spline
- Draw Screw Threads: #10-32
- Adapter Plate:
- Material: Aluminum 6061
- Finish: Black Anodized
- Vortex Shaft - 15T Spline
- Material: Stainless Steel
- Finish: Plain
- Exposed Shaft Length: 35.2mm (1.38in)
- Shaft Type: Involute Spline
- Module: 0.5
- Pressure Angle: 30°
- Teeth: 15
- Fit Class: H/e
- Draw Screw Threads: #10-32
- Shaft End Threads: #10-32
- Shaft Weight: 52g (0.115lb)
- Vortex Shaft - 20DP Gear - 7T
- Shaft Weight: 71g (0.16lb)
- Material: Alloy Steel
- Finish: Stainless Steel
- Exposed Shaft Length: 38.1mm (1.50in)
- DP: 20
- Teeth: 7
- Pitch Diameter: 0.40in (8T)
- Draw Screw Threads: #10-32
- Shaft End Threads: #10-32
Kit Contents
| SKU | PRODUCT NAME | PRODUCT QUANTITY |
| REV-21-2807 | Vortex Shaft - 8mm | QTY 1 |
| REV-21-2805 | #10-32 Shaft End Screw V2 | QTY 1 |
| SKU | PRODUCT NAME | PRODUCT QUANTITY |
| REV-21-2827 | Vortex Shaft - Falcon Compatible Spline | QTY 1 |
| REV-21-2805 | #10-32 Shaft End Screw V2 | QTY 1 |
| SKU | PRODUCT NAME | PRODUCT QUANTITY |
| REV-21-2848 | Vortex Shaft - MAXSwerve Integrated Key | QTY 1 |
| REV-21-2805 | #10-32 Shaft End Screw V2 | QTY 1 |
| SKU | PRODUCT NAME | PRODUCT QUANTITY |
| REV-21-2127 | Vortex Shaft - MAXPlanetary Input Coupler | QTY 1 |
| REV-21-2128 | MAXPlanetary Vortex Input Stage | QTY 1 |
| REV-21-2805 | #10-32 Shaft End Screw V2 | QTY 1 |
| REV-29-2911 | Socket Head Screws #10-32 x5/16in | QTY 4 |
| SKU | PRODUCT NAME | PRODUCT QUANTITY | PACK QUANTITY |
| REV-21-2849 | Vortex Shaft - 15T Spline | QTY 1 | QTY 1 |
| REV-21-2805 | #10-32 Shaft End Screw V2 - 0.5in | QTY 1 | QTY 1 |
| SKU | PRODUCT NAME | PRODUCT QUANTITY |
| REV-21-6800 | Vortex Shaft - 20DP Gear - 7T | QTY 1 |
| REV-21-2805 | #10-32 Shaft End Screw V2 | QTY 1 |
Documentation
Product Options
| SKU | PRODUCT NAME | CAD & DRAWINGS |
| REV-21-2807 | Vortex Shaft - 8mm | STEP FILE ONSHAPE DRAWING |
| REV-21-2827 | Vortex Shaft - Falcon Compatible Spline | STEP FILE ONSHAPE DRAWING |
| REV-21-2848 | Vortex Shaft - MAXSwerve Integrated Key | STEP FILE ONSHAPE DRAWING |
| REV-21-2849 | Vortex Shaft - 15T Spline | STEP FILE ONSHAPE DRAWING |
| REV-21-6800 | Vortex Shaft - 20DP Gear - 7T | STEP FILE ONSHAPE DRAWING |
| REV-21-2130 | Vortex MAXPlanetary Input Kit | STEP FILE ONSHAPE DRAWING |
