Shop All

This metal ball bearing mount bracket is used with the REV DUO System 15mm Extrusion. Version 2 brackets offer many improvements over our previous metal brackets, including holes on an 8mm grid that is compatible with many other building systems. This...

Complete gear set replacement for the Smart Robot Servo (REV-41-1097) Notes Replacement Gear Sets purchased after 03/27/2019 ship with updated versions of the replacement gears that fit the updated version of the Smart...

Extend the reach of your MXP port by using this 18" cable to reposition your boards where you need them. Fully compatible with all REV Robotics MXP accessory boards (More Board, Proto Board, & RIOduino) Specifications Keyed male and female...

The REV Robotics Digit is multi-use MXP board for interface with the roboRIO. It has four 12 segment displays, which can be used to show any letters or numbers. It also features an analog potentiometer and two momentary buttons. Teams can use the...

The 5.5mm WERA Socket Screw Driver is for use with M3 hex head screws and nuts. Kraftform Ergonomic Micro handle design features the shape that facilitates high torque transfer and precision feel for fine adjustment work,...

The Universal Hex Adapter V2 is a steel hub that allows teams to quickly and easily adapt their existing parts to work with 5mm hex.  Specifications Material: Sintered Steel Hole Pattern: Four M3 tapped holes on a 0.630in (16mm) diameter circle -...

The Locking Motion Hub places a motion pattern on any 5mm hex shaft. Use this to connect metal sprockets to 5mm hex shaft or add strength to wheels, gears, and plastic sprockets through the REV Motion Pattern without the need of a shaft collar...

This metal Hex Bearing Block is used with the REV DUO 15mm Extrusion and REV DUO Channel. A hex ball bearing is pre-pressed into the metal bracket. Specifications Material: Sintered Steel, Steel CAD & Drawings SKU-STP REV-41-1683 Onshape SKU-DR

REV 45mm x 15mm C Channel has a 45mm x 15mm rectangular profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsional strength is required. The 45mm wide side of the channel...

The HD Hex Spur Gearbox Spacer V2 makes it easier to use the Motion Pattern for mounting HD Hex Motors with a Spur Gearbox. Specifications Material: ABS Documentation DUO Build System Guide CAD & Drawings REV-41-1648 STEP File REV-41-1648...

The robust 1in Inside Corner Bracket is designed to enable more construction strategies with the REV 1in Extrusion (REV-21-1000). Designed for #10 hardware, the mounting holes are on a 1in pitch that allows for the creation of complex joints by...

Universal Hex Adapter (REV-41-1833) also available as an alternative. This part is a replacement for the discontinued Hex Hub Adapter (REV-41-1146). Expand your team's building options without giving up the products that you already own. This sintered...

Timing belts and pulleys are compatible with the REV DUO System. They are lighter and can be more efficient than chains and sprockets. Tensioning and adjustment are a thing of the past. 24 Tooth through 60 Tooth size pulleys come with two ends and an...

The UltraUSB Hub Power to USB A Cable is used to power the UltraUSB Hub off a 5V external battery pack with USB A connectors.  Documentation UltraUSB Hub Quick Start Guide

The UltraUSB Hub Power to PWM Cable is used to power the UltraUSB Hub off the 5V rail on the REV Expansion Hub or Control Hub.  Documentation UltraUSB Hub Quick Start Guide

The UltraUSB Hub Upstream to USB A Cable is a data cable used to connect the UltraUSB Hub to any USB-A device, like a laptop. Documentation UltraUSB Hub Quick Start Guide

The UltraUSB Hub Upstream to USB Micro-B OTG Cable is a data cable used to connect the UltraUSB Hub to a micro-USB phone. Documentation UltraUSB Hub Quick Start Guide

Steel hardware of the appropriate size to work with the ION Build System 1in Extrusion. Length includes the flat screw head. Specifications Material: 18-8 Stainless Steel Diameter & Thread: #10-32 Length: 1/2in Documentation ION Build System Guide...

Steel hardware of the appropriate size to work with the ION Build System 1in Extrusion. Length measured from tip to underside of screw head. Specifications Material: 18-8 Stainless Steel Diameter & Thread: #10-32 Length: 1/2in Documentation ION...

Steel hardware of the appropriate size to work with the ION Build System 1in Extrusion. Length measured from tip to underside of screw head. Specifications Material: 18-8 Stainless Steel Diameter & Thread: #10-32 Length: 3/8in Documentation ION...

These Low Profile Nylon Lock Nuts are thin enough to fit inside the channel of the ION Build System 1in Extrusion. The embedded nylon ring provides tight vibration resistant hold on the threads of the screw. Specifications Material: Zinc-plated Steel...

This cable is for use with the Blinkin LED Driver. This cable converts the JST PH 7-pin connector on the Blinkin' LED Driver module to a males 3-pin JST SM and male 4-pin JST SM connectors for connecting 5V WS2812 addressable LED and 12V RGB LED strips...

When designing chain or belt driven system, the ability to adjust tension in the system is ideal. Using the Tensioning Bushing with REV DUO U Channel allows users to fine tune their system to find the optimum amount of tension for any application...

M3 standoffs are compatible with the REV DUO System and are perfect for raising one assembly above another or as linkages when paired with male ball joint rod ends (REV-49-1561). Specifications Material: 6063 Black Anodized Aluminum Thread...

Metal sprockets designed to work in high-load applications with #25 chain. This sprocket requires a hub like REV-41-1719. Specifications Chain Size: #25 Material: 6061 Aluminum Documentation SprocketGuide BuildingGuide CAD & Drawings SKU-STP...

Metal sprockets designed to work in high-load applications with #25 chain. This sprocket requires a hub like REV-41-1719. Specifications Chain Size: #25 Material: 6061 Aluminum Documentation SprocketGuide BuildingGuide CAD & Drawings SKU-STP...

Metal sprockets designed to work in high-load applications with #25 chain. This sprocket requires a hub like REV-41-1719. Specifications Chain Size: #25 Material: 6061 Aluminum Documentation SprocketGuide BuildingGuide CAD & Drawings SKU-STP...

Metal sprockets designed to work in high-load applications with #25 chain. This sprocket requires a hub like REV-41-1719. Specifications Chain Size: #25 Material: 6061 Aluminum Documentation SprocketGuide BuildingGuide CAD & Drawings SKU-STP...

Metal sprockets designed to work in high-load applications with #25 chain. This sprocket requires a hub like REV-41-1719. Specifications Chain Size: #25 Material: 6061 Aluminum Documentation SprocketGuide BuildingGuide CAD & Drawings SKU-STP...

Metal sprockets designed to work in high-load applications with #25 chain. Specifications Chain Size: #25 Material: Sintered Steel CAD & Drawings REV-41-1716 STEP File REV-41-1716 Onshape REV-41-1716 Drawing

The 5mm Hex to 8mm Round Bearing Insert, when paired with the 8mm x 12mm x 3.5mm Flanged Bearing (REV-49-1559), allows you to support 5mm hex shaft with a robust low friction bearing. It includes a pair of locking tabs that secure the insert to the...

The U Channel Endcap spans between the two sides of U Channel to provide holes on multiple surfaces to fasten additional components to. Also, using the endcap is a great way to strengthen longer sections of U Channel that are experiencing high loads...

REV 45mm x 15mm C Channel has a 45mm x 15mm rectangular profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsional strength is required. The 45mm wide side of the channel...

REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On the sides of the channel is the Extended Motion...

REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On the sides of the channel is the Extended Motion...

REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On the sides of the channel is the Extended Motion...