12V RGB LED Strip - 5m


This 12V RGB LED Strip is compatible with the REV Blinkin LED Driver (REV-11-1105). Each LED on the strip is wired in parallel and actually contains three embedded LEDs; a red, green, and blue LED. Each color can be controlled separately to create any color that you desire. Because these LEDs are wired in parallel, the entire strip will be the same color.


  • 12V Supply Voltage
  • Common-anode LEDs 
  • 60 LEDs/m
  • Three LEDs per segment
  • 5m Strip Length
  • JST SM 4-pin Connector
  • IP65 - Rubberized Coating
  • Adhesive Backing
  • 10mm Width
  • Approximately 1.2 Amps per meter (all LEDs at full brightness)