Description
The UltraUSB Hub is designed specifically for use in competitive robotics, and gives you the ability to connect multiple USB devices to each other as well as replacing cables when damaged instead of needing to replace the whole hub. The UltraUSB Hub can also be powered externally, allowing for USB peripherals like the Logitech C270 UVC USB Camera and Logitech F310 USB Gamepad to operate with the power they need.
The UltraUSB Hub Power to USB A Cable is used to power the UltraUSB Hub off a 5V external battery pack with USB A connectors.
The UltraUSB Hub Power to PWM Cable is used to power the UltraUSB Hub off the 5V rail on the REV Expansion Hub or Control Hub.
The UltraUSB Hub Upstream to USB A Cable is a data cable used to connect the UltraUSB Hub to any USB-A device, like a laptop.
The UltraUSB Hub Upstream to USB Micro-B OTG Cable is a data cable used to connect the UltraUSB Hub to a micro-USB phone.
Features
- 2-port USB 2.0 hub
- 2 downstream USB A ports
- 1 configurable upstream port
- USB Micro-B OTG
- USB A
- Powered and un-powered operation
- External power through JST-PH 2-pin power port
- Upstream power through upstream port
- Removable JST to USB cables for easy replacement
- Cables retained within case for strain relief
Specifications
- Nominal Input Voltage: 5.0V
- Maximum downstream current:
- Un-powered: host dependent
- Powered: 500mA per port
Kit Contents
- REV-31-1592 UltraUSB Hub
- QTY 1 - UltraUSB Hub
- QTY 1 - JST-PH 4-pin to USB-A Cable for upstream data
- QTY 1 - JST-PH 4-pin to USB Micro-B OTG Cable for upstream data
- QTY 1 - JST-PH 2-pin to 3-pin 0.1" (PWM/Dupont) Connector Cable for power
- QTY 1 - JST-PH 2-pin to USB-A Cable for power
