1/2in Rounded Hex Shafts

1/2in Rounded Hex Shafts are compatible with the REV ION System and are a ready-to-use length of hex shaft that have been cut to length and have the ends tapped. The ends are tapped #10-32 in order to accept a screw and washer or shaft collar. The 1/2in hex is compatible with the shaft retention method of the MAXPlanetary output stage. The 1/2in Rounded Hex Shaft - 36in is not tapped.

Features

• 1/2in hex profile is compatible with common FRC motion products
• Rounded corners form a 13.75mm circle for use with compatible round bearings
• Compatible with MAXPlanetary output stage
• Pre-sized to round-number lengths
• Pre-tapped for shaft retention screws (1/2in Rounded Hex Shaft - 36in is not tapped)

Specifications

• Length: Varies (see table below)
• Hex Size: 0.5in (12.7mm) Across the Flats
• Round Diameter: 0.541in (13.75mm)
• Thread Size (both ends): #10-32
• Thread Depth (both ends): 0.5in (12.7mm)
• Material: Aluminum 7075
• Finish: Black Anodized

Documentation

• ION Build System Guide
• Introduction to Motion
• 1/2in Rounded Hex Shaft User Guide
• Onshape Application Examples

Product Options