null

3in MAXSwerve Module Pre-order

SKU:
PRE-ORDER-REV-21-3005
$300.00
Maximum Purchase:
25 units

The 3in MAXSwerve Module will be available for pre-order, while supplies last. Offer is subject to specific terms and conditions. If terms and conditions are not met, your order may be subject to cancellation. Due to the nature of the offer, no items other than pre-order products are allowed in cart during purchase. Pre-orders of this product are expected to ship in late December 2022, please refer to our blog for terms, conditions, and shipping updates.

The 3in MAXSwerve Module is the smallest and lightest swerve module designed for FRC Teams. Leveraging many parts of the REV ION System, MAXSwerve aims to reduce the complexity traditionally associated with swerve drivetrains. The module features a 3in wheel to ensure that your wheelbase is as wide as possible within your robot footprint. Designed with robustness and serviceability in mind, the module features an all-metal construction with steel drive gears. The rotation (azimuth) is gear-driven from our NEO 550 Brushless Motor through an UltraPlanetary Gearbox. The included Through Bore Encoder provides 10-bit angular resolution directly on the turning axis. While the azimuth must be driven with a NEO 550 and SPARK MAX Motor Controller to take advantage of new software features, teams can use either a NEO Brushless Motor or Falcon500 for the main drive motor. These modules work seamlessly with the MAXTube structural pieces, however they are designed to work with any 2x1in aluminum tubing.

Each module comes with all the gears for 3 different robot speeds:

 Pinion   Gear Ratio   Drive Free Speed (NEO): ft/sec 
 12T  5.50:1  13.51
 13T  5.08:1  14.63
 14T  4.71:1  15.76

New software features available before Kickoff:

  • NEW firmware available for the SPARK MAX that enables absolute encoder input, allowing for closed-loop control of the module on the motor controller itself.  
  • Using the included physical calibration tool, calibration values can be saved to the SPARK MAX, making modules interchangeable without updating robot code.
  • NEW APIs in REVlib for swerve functions.
  • NEW features in the REV Hardware Client for calibration and configuration of your robot drivetrain.

Motors, motor controllers, and structural framing not included, but can be added to complete a fully-functioning swerve drivetrain. Check out our MAXSwerve Bundles for more options - Coming Soon!

REV Robotics would like to thank FRC Team 3005 - RoboChargers for the help in developing this product. The module is based off their design used during the 2022 FRC season.

Features

  • Metal construction
  • 3in wheel diameter
  • Module mounting maximizes wheelbase footprint
  • Compatible with NEO Brushless Motor or Falcon 500 (with replacement shaft)
  • Azimuth driven by NEO 550 Brushless Motor & UltraPlanetary Gearbox
  • All steel gears in drive powertrain
  • Gear-driven azimuth drive

Specifications

  • Height:
    • With NEO: 171.5mm (6.75in)
    • With Falcon: 194.4mm (7.66in)
  • Footprint:
    • With mounting tabs: 133.1mm x 133.1mm (5.24in x 5.24in)
    • Without mounting tabs: 100.5mm x 100.5mm (3.96in x 3.96in)
  • Weight:
    • With NEO: 1720g (3.80lb)
    • With Falcon: 1800g (3.97lb)

Kit Contents

 SKU   PRODUCT NAME   QUANTITY 
 REV-21-3005-P01   3in MAXSwerve Module - Bottom Plate   QTY 1 
 REV-21-3005-P02   3in MAXSwerve Module - Top Plate   QTY 1 
 REV-21-3005-P03   3in MAXSwerve Module - Steering Gear   QTY 1 
 REV-21-3005-P04   3in MAXSwerve Module - Active Fork   QTY 1 
 REV-31-3005-P05   3in MAXSwerve Module - Passive Fork   QTY 1 
 REV-31-3005-P06   3in MAXSwerve Module - Bevel Pinion   QTY 1 
 REV-31-3005-P07   3in MAXSwerve Drive - Wheel Bevel Gear   QTY 1 
 REV-31-3005-P08   3in MAXSwerve Module - Steering Pinion 14T   QTY 1 
 REV-31-3005-P09   3in MAXSwerve Module - Low Speed Pinion 12T   QTY 1 
 REV-31-3005-P11 
 3in MAXSwerve Module - Drive Spur Gear   QTY 1 
 REV-31-3005-P12   3in MAXSwerve Module - UltraPlanetary Block   QTY 1 
 REV-31-3005-P13   3in MAXSwerve Module - Encoder Bridge   QTY 1 
 REV-31-3005-P15   3in MAXSwerve Module - Wheel Hub   QTY 1 
 REV-31-3005-P18   3in MAXSwerve Module - Wheel Axle   QTY 1 
 REV-21-3001   3in MAXSwerve Module Spacer Pack  QTY 1 
 REV-21-3000 
 3in MAXSwerve Module Hardware Pack   QTY 1 
 REV-21-3005-P10   3in MAXSwerve Module Bearing Pack   QTY 1 
 REV-21-3005-P22   3in MAXSwerve Module - Mid Speed Pinion 13T   QTY 1 
 REV-21-3005-P23   3in MAXSwerve Module - High Speed Pinion 14T   QTY 1 
 REV-21-2999   3in MAXSwerve Module - Motor Key   QTY 3  
 REV-21-3004   3in MAXSwerve Wheel - 75A   QTY 1 
 REV-22-2997   3in MAXSwerve - Calibration Tool   QTY 1 
 REV-21-2998   3in MAXSwerve - SPARK MAX Mounting Bracket   QTY 1 
 REV-41-1607   UltraPlanetary HD Hex Mounting Plate   QTY 1 
 REV-41-1601   UltraPlanetary Cartridge - 3:1   QTY 1 
 REV-41-1602   UltraPlanetary Cartridge - 4:1   QTY 1 
 REV-41-1608-PK2   UltraPlanetary 550 Motor Pinion Gear - 13 Tooth - 2 pack   QTY 1 
 REV-11-1271   Through Bore Encoder   QTY 1 
 REV-11-3326   Absolute Encoder Adapter   QTY 1 
 REV-11-3327   15cm JST PH 6-pin Extension Cable   QTY 1 

Documentation

CAD & Drawings