Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
USB-A to USB-C 2.0 Cables
$10.50 - $11.00The USB-A to USB-C 2.0 Cable - 2m (REV-11-1232) is a longer version of the USB-A to USB-C cable included with the SPARK MAX Motor Controller and the Control Hub. Use this cable to connect your SPARK... -
UHMWPE Cords
$7.75 - $13.501.2mm UHMWPE Cord - 10M (REV-41-1162) is a high strength string for use with the small Pulley Bearings and the 15mm Linear Motion Kit to create a powered lift. 3mm UHMWPE Cord - 10m (REV-29-1244)... -
M3 Nuts
$6.00 - $8.75M3 Nyloc Nuts (REV-41-1361-PK100) are zinc plated steel nuts compatible with all REV M3 screws or bolts. Contains a nylon insert which increases grip on screw, reducing the chance of the nut... -
Encoder Adapters
$11.00 - $12.50Absolute Encoder Adapter (REV-11-3326) connects the REV Through Bore Encoder directly to the SPARK MAX Data Port. This adapter connects the Absolute Duty Cycle output of the Through Bore Encoder to... -
PWM Cables
$7.75 - $12.50The 36in PWM Cable - 4 Pack (REV-11-1130-PK4) is an ideal servo extension, providing a 3ft reach for servos, sensors, and other PWM-controlled devices. Featuring a universal 3-pin design with a... -
Replacement Gear Set for Smart Robot Servo V2
$13.50Complete gear set replacement for the Smart Robot Servo V2. Documentation Smart Robot Servo V2 Overview -
EasySwerve Spare Parts
$6.00 - $33.00These spare parts are designed specifically for servicing and maintaining the 4in EasySwerve Module (REV-21-3006). Available replacement components include gears, shafts, bearings, base plates,... -
Drivetrain Kit - 4in EasySwerve - NEO Vortex
REV-25-3389$2,350.00The 4in EasySwerve Drivetrain Kit with NEO Vortex motors is a complete solution for building a high-performance REV ION drivetrain base, combining the control of swerve with the flexibility of... -
Drivetrain Kit - 4in EasySwerve - NEO 2.0
REV-25-3388$2,000.00The 4in EasySwerve Drivetrain Kit with NEO 2.0 motors is a complete solution for building a compact and capable REV ION drivetrain base, combining the control of swerve with the flexibility of... -
ION Bearing Bundle
REV-25-3346$285.00The ION Bearing Bundle brings together the most-used bearings and bearing blocks in the ION Build System so you can spend less time sourcing parts and more time building. From high-speed shooters to... -
MAXPlanetary NEO 2.0 Input Kit
REV-21-2147$15.25The MAXPlanetary NEO 2.0 Input Kit bundles the two parts you need to mount a NEO 2.0 Brushless Motor to the MAXPlanetary System with minimal hassle and maximum packaging efficiency. By pairing the... -
ION Hub Adapters
$3.00 - $5.00The REV Hub Adapter MAXSpline to 1/2in Hex makes it fast and easy to convert MAXSpline based wheels, sprockets, and other ION components to a standard 1/2in hex drive interface. Designed for... -
ION Motor Mounting Blocks
$32.00The ION Motor Mounting Blocks family offers two options for securely mounting motors and supporting extended shafts within robot mechanisms. Both versions use aluminum plates with integrated... -
Molex Microfit+ Power and CAN Cable - 6in
REV-11-8020$6.00The Molex MicroFit+ Power and CAN Cable is the dedicated replacement and accessory cable for the MAXSpline Through Bore Encoder. It provides both power and CAN connectivity through a compact, secure... -
1in Basic Corner Bracket - 2 Pack
REV-21-3293-PK2$8.00The 1in Basic Corner Bracket is a compact, low profile solution for strengthening MAXTube joints or adding simple mounting points where space is limited. Its 5mm thick aluminum construction provides... -
1in Angled Corner Bracket - 2 Pack
REV-21-3291-PK2$8.00The 1in Angled Corner Bracket is a compact, heavy duty solution for reinforcing MAXTube joints and building rigid structures in tight spaces. Its 5mm thick aluminum body provides consistent strength,... -
Locking Shaft Collar - MAXSpline - 2 Pack
REV-21-6532-PK2$10.00The Locking Shaft Collar MAXSpline is a compact, purpose built clamping solution for securing components to a MAXSpline shaft. Designed as a thin aluminum plate, it can be paired with a second collar... -
Locking MAXHub - 1/2in Hex Kit
REV-21-6530$8.00The Locking MAXHub - 1/2in Hex Kit is a compact, dual plate hub system designed to secure 1/2in hex shafting inside any MAXSpline bore component. Each kit includes two identical wedge locking plates... -
Adjustable Tube Mount - 2 Pack
REV-21-4016-PK2$10.00The Adjustable Tube Mount is a precision machined aluminum bracket designed to give teams fine control over how 2x1 MAXTube attaches to robot structure. Three center counterbored holes allow a... -
MAXPlanetary Universal Input Stage V2
REV-21-2146$12.00The MAXPlanetary Universal Input Stage V2 is a redesigned mounting solution for integrating a wide range of FRC motors into the MAXPlanetary System. Built as the next evolution of the original... -
CAN Terminator Pack
REV-11-3324$7.00The CAN Terminator Pack provides two compact, plug-ready termination options for teams looking to maintain reliable CAN bus performance anywhere in their robot’s wiring. Each terminator uses a small... -
ION Conveyor Brush System
$12.00 - $24.00The ION Conveyor Brush System is a customizable solution for creating wide to narrow intake brushes that adapt to a variety of game pieces. The 24in brush can be cut to any length using a bandsaw or... -
ION Round Belt System
$6.00 - $30.00The ION Round Belt System provides a simple and adaptable way to transfer power in compact robot mechanisms. Designed around a 2in outer diameter when the belt is installed, the system stays on pitch... -
8mm Shaft Spacer - 1/16in - Plain - 50 Pack
REV-21-4483-PK50$9.00The 8mm Shaft Spacer is a stainless steel 1/16 inch washer designed for precise shaft spacing in FRC and FTC mechanisms. Used on the NEO 2.0 Brushless Motor to achieve correct input coupler alignment... -
MAXPlanetary MAXSpline Output Coupler
REV-21-3630$22.00The MAXPlanetary MAXSpline Output Coupler [REV-21-3630] provides a compact and reliable way to interface a MAXPlanetary Gearbox’s 1/2 inch hex output with MAXSpline Shaft systems. Designed for teams... -
NEO 2.0 Sensor Cable
REV-11-1287$5.00The NEO 2.0 Sensor Cable connects the NEO 2.0 Brushless Motor’s sensor port to a standard JST PH 6-pin interface used on REV motor controllers. The 2x3-pin PHSD connector provides a secure, latching... -
ION Cone Wheels
$6.00 - $8.00ION Cone Wheels are designed to give teams controlled, predictable vectoring for game pieces and objects. Their tapered profile naturally guides items toward the smaller diameter, making them... -
4in Spiky Wheel - Tread - 8 Pack
REV-21-4419-PK8$32.00The 4in Spiky Wheel Tread 8 Pack provides replacement treads for teams using the 4in Spiky Wheels on their EasySwerve-equipped robots. These injection molded TPU treads feature an aggressive spiked... -
4in Spiky Wheel - Aluminum Hub
REV-21-4418$30.00The 4in Spiky Wheel Aluminum Hub is a precision machined and balanced wheel hub designed for use with the 4in Spiky Wheel system and the 4in EasySwerve Module. Built from 6061 aluminum, this hub... -
20DP Gear - 15T Spline
$12.00 - $14.0020DP Gears are compatible with the REV ION System and come in a wide range of sizes and bores. This gear features a 15T spline bore for use with 15T spline shaft and motors like our NEO 2.0 Brushless... -
MAXSpline Grommet - 10 Pack
REV-21-3640-PK10$10.00The MAXSpline Grommet provides a simple way to route wires through MAXTube while preventing abrasion against bare aluminum. Made from pliable 60A rubber, it press-fits into the MAXSpline Bore on... -
4in Spiky Wheel - Hub and Tread Bundle
REV-25-3171$152.00The 4in Spiky Wheel - Hub and Tread Bundle includes everything needed to outfit a full 4in EasySwerve drive with high-traction 4in Spiky Wheels and a complete set of replacement treads. The bundle... -
15T Spline to 1/2in Hex Adapter
REV-21-4484$11.00The 15T Spline to 1/2in Hex Adapter provides a simple and reliable way to integrate motors with a 15T spline output shaft into mechanisms designed around 1/2in rounded hex. This adapter is ideal for... -
15T Spline Shaft - 480mm
REV-41-6457$16.00The 15T Spline Shaft is a solid stainless steel shaft sized at 480mm for long span applications or to be used as stock to cut custom length shafts. Its 15 tooth involute spline profile features an... -
MAXPlanetary 2:1 Cartridge
REV-21-2140$45.00An individual cartridge for the MAXPlanetary System. This cartridge is a 2:1 gear reduction. The 2:1 cartridge expands MAXPlanetary ratio options, joining the 1:1 (no cartridge), 3:1, 4:1, 5:1, and... -
Elevator Bearing Block - 2 Pack
REV-20-2051-PK2$18.50$15.73The Elevator Bearing Block (REV-20-2051) is a trusted choice for smooth sliding motion between two pieces of rectangular tubing. It mounts on the narrow, 1in side, of tubing (e.g. 1x1 or 2x1) and...