REV DUO

Through Bore Bearings are compatible with the REV DUO System and are used with 5mm Hex Shafts recommend for the DUO Extrusion System to provide a low friction rotating shaft support. These low profile bearings fit in any of the 3mm...

12-point combination wrench for use with M3 hardware. Specifications Chrome vanadium steel 5.5mm  15° angled ring head

5mm Plastic Hex Bore Gears are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable set screws. Gears 45 tooth...

Our Polyurethane Hollow Round Belting is perfect for your conveyor, and intake mechanisms. Use Barbs to assemble custom length belts. 

The JST PH 6-pin to JST PH 4-pin Cable allows for seamless connection of the Through Bore Encoder to the dedicated encoder ports on the FTC Control System (Expansion Hub or Control Hub). Also allows for the HD Hex Motor to...

Complete gear set replacement for the Smart Robot Servo (REV-41-1097) Notes Replacement Gear Sets purchased after 03/27/2019 ship with updated versions of the replacement gears that fit the updated version of the Smart...

DUO Plastic #25 Sprockets are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable set screws. Sprockets 15 tooth and...

These small connector boards can be used to join two JST VH 2-pin Motor Cables to create a longer cable. 

The HD Hex series motors and gearboxes feature integrated encoders and power that plug right into the Control Hub (REV-31-1595) and Expansion Hub (REV-31-1153). The gearbox options feature 5mm Hex output or coupler making it easy to connect gears,...

5mm Hex Spacers are compatible with the REV DUO System and accurate way to space gears, sprockets, wheels, and other parts along a 5mm hex shaft. Mix and match various spacer lengths to adjust spacing in increments as small as 1.5mm...

The End Cap Bearing is used with the 5mm hex shaft recommended for the DUO Build System 15mm Extrusion to provide a low friction rotating shaft support. This bearing is intended to seat in any of the plastic REV DUO brackets with the 9mm ID bearing seat...

Nylon Zip Ties with rounded edges to prevent snagging. Length is idea for cable management and many other uses. Specifications 160mm long Quality nylon construction 18lb. tensile strength

This 12V RGB LED Strip is compatible with the REV Blinkin LED Driver (REV-11-1105). Each LED on the strip is wired in parallel and actually contains three embedded LEDs; a red, green, and blue LED. Each color can be controlled separately to create any...

The 5mm Hex to 8mm Round Bearing Insert, when paired with the 8mm x 12mm x 3.5mm Flanged Bearing (REV-49-1559), allows you to support 5mm hex shaft with a robust low friction bearing. It includes a pair of locking tabs that secure the insert to the...

15mm Plastic Brackets are compatible with the REV DUO System. Each bracket includes a set of alignment ribs designed to seat the bracket into the extrusion channel increasing joint alignment, strength, and rigidity. The 15mm Plastic Variable Angle...

Zinc plated steel nuts compatible with all REV DUO M3 screws or bolts. This is a plain nut which does NOT contains a nylon insert.  Specifications Thread Pitch: M3 x 0.5 Material: Corrosion resistant zinc plated steel Width: 5.5mm Height: 2...

Timing belts and pulleys are compatible with the REV DUO System. They are lighter and can be more efficient than chains and sprockets. Tensioning and adjustment are a thing of the past. 24 Tooth through 60 Tooth size pulleys come with two ends and an...

The Servo Shaft Adapter makes it possible to drive a 5mm hex shaft with any 25T output servo including the Smart Robot Servo. The adapter attaches to the servo spline like any common servo horn and accepts a 5mm hex shaft on the opposite end...

15mm Plastic Motion Brackets are compatible with the REV DUO System. Each bracket features a set of alignment ribs designed to seat the bracket into the extrusion channel increasing joint alignment, strength, and rigidity.  The 15mm Plastic...

Double-sided hook and loop tape allows you to cut to desired custom lengths. Reusable, secure hold. Specifications 13.5mm width x 2m length