Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
5V Addressable LED Strip - 1m
REV-11-1198$26.00This 5V WS2812B Addressable RGB LED Strip is compatible with the REV Blinkin LED Driver (REV-11-1105). Each LED contains an integrated driver IC and three LEDs; a red, green, and blue LED. Each... -
NEO Vortex Solo Adapter
REV-11-2828$21.75The NEO Vortex Solo Adapter, allows teams to seamlessly integrate the NEO Vortex Brushless Motor with a SPARK MAX Motor Controller. This adapter breaks out the motor sensor connector and phase wire... -
MAXSpline Shaft Bearing Blocks
$13.00 - $34.75The MAXSpline Shaft Bearing Block Kit and MAXSpline Bearings are compatible with the REV ION System and are perfect for using MAXSpline Shaft in a live axle application or any other similar sized... -
U Channel Endcap - 4 Pack
REV-41-1687-PK4$21.75The U Channel Endcap spans between the two sides of U Channel to provide holes on multiple surfaces to fasten additional components to. Also, using the endcap is a great way to strengthen longer... -
Analog Pressure Sensor
REV-11-1107$39.42The REV Robotics Analog Pressure Sensor is a 5V sensor that can measure pressures up to 200 PSI. It outputs an analog voltage that is proportional to the measured pressure and can plug directly into... -
ION #35 Sprockets
$11.00 - $43.25Designed for teams requiring higher load capacity in chain-driven systems, the ION #35 Sprockets come in three versatile options, each compatible with the REV ION Build System: #35 Hub Sprockets -... -
Anderson to JST VH Cable - 12 cm - 4 pack
REV-31-1381-PK4$25.00Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub. Teams that already own and use the Anderson Powerpole Crimper may purchase... -
PWM Cable Clip - 10 Pack
REV-11-1229-PK10$6.00These plastic clips are designed to keep standard 0.1" 3-pin PWM connectors together. Simply clip them around an assembled pair of connectors. -
15mm Metal Motion Brackets
$5.50 - $6.0015mm Metal Brackets are compatible with the REV DUO System. Each bracket includes holes on an 8mm grid that is compatible with many other building systems. The 15mm Metal Bent Core Hex Motor Bracket... -
UltraPlanetary Cartridge - 3:1
REV-41-1601$12.50This 3:1 cartridge is a pre-assembled, lubricated stage for the UltraPlanetary System. The UltraPlanetary System is a cartridge based modular gearbox designed to handle the rigors of the competition... -
Potentiometer
REV-31-1155$15.25This 10K potentiometer can be used as an analog sensor with the Control Hub or Expansion Hub. This potentiometer has a 270 degree range of motion and can be mounted to any REV DUO brackets with the... -
Universal Hex Adapter V2 - 2 Pack
REV-41-1833-PK2$8.25The Universal Hex Adapter V2 is a steel hub that allows teams to quickly and easily adapt their existing parts to work with 5mm hex. Specifications Material: Sintered Steel Hole Pattern: Four M3... -
DUO Mecanum Wheel Set
REV-45-1655$160.00Tested for the rigors of competition, DUO Mecanum Wheels are steel plates with rollers supported by ball bearings allowing for the perfect combination of wheel rigidity and roller movement. Included... -
8mm to 1/2in Hex Adapter
REV-21-1879$11.00With the 8mm to 1/2in Hex Adapter you can convert 8mm keyed shafts to drive 0.5in hex bore wheels, sprockets, gears, and more! Use these with any motors with a 8mm round keyed output shaft, like... -
SRS Programmer
REV-31-1108$25.00The REV Robotics SRS Programmer is the key to unlocking all the smart features of the (SRS) Smart Robot Servo (sold separately). Switching between continuous rotation, standard servo, and custom... -
DUO Omni Wheels
$27.00 - $31.00DUO Omni Wheels are compatible with the REV DUO System and have rollers mounted around the outside which passively rotate at 90 degrees to the powered direction of the wheel. DUO Omni Wheels can be... -
MAXSpline Shaft Endcaps
$5.50 - $15.25MAXSpline Shaft Endcaps are compatible with the REV ION System and transform your MAXSpline Shaft extrusion into a live axle driven by a 1/2in Hex shaft. MAXSpline Shaft Endcaps come in two different... -
DUO Grip Wheels
$13.00DUO Grip Wheels are used for intakes, conveyor systems, and shooters. With a solid 5mm Hex Hub molded into the wheel no external hub is required. These wheels come in two different durometers, Soft -... -
36in CAN Extension Cable - 5 Pack
REV-21-2052-PK5$12.50The 36in CAN Extension Cable is a 3-pin connector to interface with existing CAN devices. Specifications Length: 36in (3ft) Wire Colors: yellow, green 22 AWG -
Color Sensor V2
REV-31-1537$13.50This product is no longer in production and is only available as long as supplies last. This product has been replaced with Color Sensor V3 (REV-31-1557). Version 3 of the REV Color Sensor introduces...